Behringer SHARK DSP110 Manual - Page 21
contact to earth. Electrostatic charges might affect the operation of - tips
View all Behringer SHARK DSP110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
SHARK DSP110 Unbalanced use of mono 1/4" jack plugs Tip = Signal Sleeve = Ground / Shield Balanced use of stereo 1/4" jack plugs Tip = hot (+ve) Ring = cold (-ve) Sleeve = Ground / Shield Tip Sleeve Strain relief clamp Tip Ring Sleeve Strain relief clamp For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Balanced use with XLR connectors 2 Input 1 1 = Ground / Shield 1 2 = hot (+ve) 3 = cold (-ve) 3 For unbalanced use pin 1 and pin 3 have to be bridged 2 3 Output + Fig. 3.2: Different plug types Please ensure that only qualified persons install and operate the SHARK. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the SHARK! 3. INSTALLATION 21