Behringer SHARK DSP110 Manual - Page 22

SHARK DSP110 4. SPECIFICATIONS AUDIO INPUTS Connectors Type Impedance Nominal Operating Level Max. Input Level AUDIO OUTPUTS Connectors Type Impedance Nominal Operating Level Max. Output Level SYSTEM SPECIFICATIONS Frequency Response Noise THD DIGITAL PROCESSING Converters Sampling Rate DISPLAY Type POWER SUPPLY Mains Voltages PHYSICAL Dimensions (H * W * D) Net Weight XLR and 1/4" jack RF filtered, servo-balanced input 6 kOhms balanced, 3 kOhms unbalanced microphone or line level source (switchable) +19 dBu at microphone level and line level XLR and 1/4" jack electronically servo-balanced output stage 60 Ohms balanced, 30 Ohms unbalanced microphone level source or +4 dBu (switchable) +20 dBu at +4 dBu nominal level, -12 dBu at microphone level 10 Hz to 21 kHz > 92 dB at line level, unweighted, 22 Hz to 22 kHz > 89 dB at microphone level, unweighted, 22 Hz to 22 kHz 0.007 % typ. @ +4 dBu, 1 kHz, gain 1 24-bit Sigma-Delta, 64/128-times oversampling 46.875 kHz 4-digit numeric LED display USA/Canada U.K./Australia Europe Japan General export model 120 V ~, 60 Hz, PSU DSP110UL 240 V ~, 50 Hz, PSU DSP110UK 230 V ~, 50 Hz, PSU DSP110EU 100 V ~, 60 Hz, PSU DSP110JP 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz approx. 2 1/4" (56 mm) x 3 1/2" (88 mm) x 5 1/8" (130 mm) approx. 0.5 kg BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated. 22 4. SPECIFICATIONS