Belkin F1DA116Z User Manual - Page 21
Step 4, Step 5 - kvm switch
UPC - 722868631249
View all Belkin F1DA116Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
section Installation Step 4 1 Connect the Belkin Dual-Port Micro-Cable Kit for USB to the desired host ports on the PRO3 KVM Switch. (Refer to diagram below.) Your server should 2 recognize the KVM-Switch connection and automatically install the HID USB driver, if necessary. 3 4 5 6 Step 5 7 Repeat Steps 1 through 4 for each additional USB server you wish to connect. Note: We recommend that you attach the Belkin Dual-Port Micro-Cable USB Kit 8 directly to a free USB port on your server. Note: When a USB Cable Kit is connected to a Sun server, the Server Interface Module emulates the Sun keys using a set of key combinations called "combo keys". Refer to the table on page 35 for a list of Sun functions supported by the PRO3 KVM Switch. 19
1
2
3
4
5
6
7
8
section
19
Installation
Step 4
Connect the Belkin Dual-Port Micro-Cable Kit for USB to the desired host
ports on the PRO3 KVM Switch. (Refer to diagram below.) Your server should
recognize the KVM-Switch connection and automatically install the HID USB
driver, if necessary.
Step 5
Repeat Steps 1 through 4 for each additional USB server you wish to connect.
Note:
We recommend that you attach the Belkin Dual-Port Micro-Cable USB Kit
directly to a free USB port on your server.
Note:
When a USB Cable Kit is connected to a Sun server, the Server Interface
Module emulates the Sun keys using a set of key combinations called “combo
keys”. Refer to the table on page 35 for a list of Sun functions supported by the
PRO3 KVM Switch.