Belkin F1DA116Z User Manual - Page 23
BANK-DIP-Switch Configuration Chart - 8 port kvm switch
UPC - 722868631249
View all Belkin F1DA116Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installation section How to Assign a BANK Address 1 All PRO3 KVM Switches feature a "BANK DIP" switch. The "BANK DIP" switch is used to assign the proper BANK address to each PRO3 KVM Switch. 2 • For a single-unit configuration, set the "BANK DIP" switch on the PRO3 KVM Switch to the "primary" (BANK address 00) setting. This is the factory default setting. 3 • For a multi-unit configuration, the "BANK DIP" switch on the primary KVM switch must be set to "BANK address 00". Each secondary unit must be set 4 to a unique BANK address (from 01 through 15). Refer to the chart below for "BANK DIP" switch settings. 5 BANK-DIP-Switch Configuration Chart DIP SWITCH# BANK 6 ADDRESS 1 2 ON ON 3 4 5 6 ON ON ON ON BANK 0 7 PRIMARY (default) ON ON OFF ON ON ON BANK 1 SECONDARY 8 ON ON ON OFF ON ON BANK 2 SECONDARY ON ON OFF OFF ON ON BANK 3 SECONDARY ON ON ON ON OFF ON BANK 4 SECONDARY ON ON OFF ON OFF ON BANK 5 SECONDARY ON ON ON OFF OFF ON BANK 6 SECONDARY ON ON OFF OFF OFF ON BANK 7 SECONDARY ON ON ON ON ON OFF BANK 8 SECONDARY ON ON OFF ON ON OFF BANK 9 SECONDARY ON ON ON OFF ON OFF BANK 10 SECONDARY ON ON OFF OFF ON OFF BANK 11 SECONDARY ON ON ON ON OFF OFF BANK 12 SECONDARY ON ON OFF ON OFF OFF BANK 13 SECONDARY ON ON ON OFF OFF OFF BANK 14 SECONDARY ON ON OFF OFF OFF OFF BANK 15 SECONDARY ON = Up Position, OFF = Down Position Example: Four 8-Port PRO3 KVM Switches (F1DA108Zea) are daisy-chained together to manage up to 32 servers. The DIP switch on the primary KVM switch is set to "BANK 00" (factory default) and the secondary units are each set to a unique BANK (between 01 and 03). 21