BenQ 9H.J1P77.Q4A User Manual - Page 56

Menu/Exit, SYSTEM SETUP: Advanced, Lamp Settings, Mode/Enter, Reset Lamp Timer, Reset

Get BenQ 9H.J1P77.Q4A - DLP Short Throw SVGA 2500 PDF manuals and user guides
UPC - 840046016791
View all BenQ 9H.J1P77.Q4A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

10. Tighten the screw that secures the lamp. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 11. Ensure the handle is fully laid flat and locked in place. 12. Replace the lamp cover on the projector. 13. Tighten the screws that secure the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 14. Restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 15. After the start-up logo, press Menu/Exit and then press / to highlight the SYSTEM SETUP: Advanced menu. 16. Press to highlight Lamp Settings and press Mode/Enter. The Lamp Settings page displays. 17. Press to highlight Reset Lamp Timer and press Mode/Enter. A warning message displays asking if you want to reset the lamp Notice Reset Lamp Timer? timer. Highlight Reset and press Mode/Enter. The lamp time will be reset to "0". Reset Cancel Do not reset if the lamp is not new or replaced as this could cause damage. 56 Maintenance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Maintenance
56
14.
Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
15.
After the start-up logo, press
Menu/Exit
and then press
/
to highlight the
SYSTEM SETUP: Advanced
menu.
16.
Press
to highlight
Lamp Settings
and press
Mode/Enter
. The
Lamp Settings
page
displays.
17.
Press
to highlight
Reset Lamp Timer
and
press
Mode/Enter
. A warning message
displays asking if you want to reset the lamp
timer. Highlight
Reset
and press
Mode/Enter
.
The lamp time will be reset to "0".
Do not reset if the lamp is not new or replaced as this
could cause damage.
10.
Tighten the screw that secures the lamp.
•
Loose screw may cause a bad connection, which
could result in malfunction.
•
Do not over tighten the screw.
11.
Ensure the handle is fully laid flat and locked in
place.
12.
Replace the lamp cover on the projector.
13.
Tighten the screws that secure the lamp cover.
•
Loose screw may cause a bad connection, which
could result in malfunction.
•
Do not over tighten the screw.
Reset Lamp Timer?
Reset
Cancel
Notice