Binatone Acura 3000 User Guide - Page 12

Setting up continue... REMOTE ACCESS 1 2 3 4 The REMOTE ACCESS requires a three-digit code that you need to enter if you call when away from home to check your messages. The default is 321. You can change it to any three digits you want. Press the OK/MENU button. Ö The display shows OPTIONS MENU . Press the UP or DOWN button until the display shows REMOTE ACCESS. Press the OK/MENU button to confirm. Ö The current three-digit code is shown, with the first digit blinking. Press the UP or DOWN button to set the first digit of the REMOTE ACCESS code. 5 Press the OK/MENU button to confirm. Ö The second digit of the code will be blinking. 6 Press the UP or DOWN button to set the second digit of the REMOTE ACCESS code. 7 Press the OK/MENU button to confirm. Ö The third digit of the code will be blinking. 8 Press the UP or DOWN button to set the third digit of the REMOTE ACCESS code. 9 Press the OK/MENU button to confirm the new REMOTE ACCESS code setting. 10 Press the / button to return to standby mode. TAM HD: ON/OFF setting Two different compression rates (ON and OFF) are provided for you to select the recording quality/ total recording time of incoming messages. With the compression rate set to ON the recording. quality will be higher, but it will only save up to about 20 minutes of messages. With the compression rate set to OFF the recording quality will be lower, but it will save up to about 40 minutes of messages. Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 12