Binatone Acura 3000 User Guide - Page 33
Using, Acura 3000
View all Binatone Acura 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Troubleshooting continue... Answering Machine "The machine won't record any messages" The machine's memory may be full. You need to delete enough recorded messages to free at least one minute of recording time. Or you can delete all recorded messages to make room for new ones Make sure the machine is switched on - the MESSAGE light should be on. "Remote operation doesn't work." Make sure you have not selected OGM2 - with OGM2 selected, callers cannot leave messages (see page 25). Make sure you are using the correct remote security code Check that you are using a suitable tone-dialling phone. Some cordless or mobile phones do not generate continuous tones and so are not ideal for remote operation. Don't leave more than 10 seconds between key presses; otherwise, your call will be cut off. Using your Acura 3000 on a PBX "Last Number Redial and or memory dialling don't work on a PBX. When you first make a call, try pressing the REDIAL/ PAUSE button for a pause between the outside line access digit (e.g.9) and the telephone number. You should later be able to redial the number. When storing numbers in memory, you can include the outside line access digit (e.g.9) and pause (P) if necessary, with each number. If your PBX requires you to wait for a second Dial tone before dialling the telephone number, press the REDIAL/PAUSE button for a pause between the access digit and the number. Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 33