Binatone Acura 3000 User Guide - Page 14

Telephone operation continue... To adjust the speakerphone volume During a call; Adjust the volume of the speakerphone to your comfortable volume level using the VOLUME buttons located on the top of the Base unit. Ö The display shows the volume level from 1 to 6, in the lower left corner of the LCD Screen. To end a call To switch between the Handset and the Speakerphone Replace the Handset on the Base unit cradle or press the SPEAKERPHONE button on the Base unit. During a phone conversation through the Handset press the SPEAKERPHONE button to speak hands-free. The Speakerphone icon on the display and the Speakerphone light next to the button will turn on, but conversation remains through the Handset until the Handset is replaced on the Base unit cradle. While in speakerphone mode, lift the Handset to enable a private conversation. To mute the mouthpiece or microphone 1 2 During a call, you can mute the microphone or the mouthpiece so that the person on the other end cannot hear you. Press the MUTE button. Ö While the microphone is muted, MUTE will flash in the lower right corner of the display, and the mute icon will also flash. Press the MUTE button again to get back to the call. LCD screen backlight The display backlight will turn on for 15 seconds every time any button is pressed or when ringing is received. Voice Message Waiting Quick 1 Dial (1571) 2 If you subscribe to your telephone service provider's voice messaging service, to access your messages: Press and hold the digit 1 key for more than 2 seconds. The phone will automatically dial out the common UK message number 1571. Note: If the phone is in standby mode it will make the call in speakerphone mode. Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.