Home » Bosch Manuals » Security Cameras » Bosch DB18C3100R2 » Manual Viewer

Bosch DB18C3100R2 Installation Guide - Page 137

Connecting the DCF 77 Radio Clock, Communications Port COM1

Add to My Manuals
Save this manual to your list of manuals

Page 137 highlights

DiBos/DiBos Micro 9.8 Connecting the DCF 77 Radio Clock To be carried out by authorized personnel only! The radio clock is connected via a serial interface. NOTICE! Only the NeoClock DCF 77 radio clock may be used. Connections | en 137 1 Video system 2 COM x 3 Radio clock connecting cable 4 DCF 77 When retrofitting, the following installation must be carried out. Use the supplied installation CD. 1. Connect the radio clock to the serial interface. 2. Log on as Administrator. 3. Select the interface. - Select Start > Control Panel > System. - Select the Hardware tab and click Device Manager. - In the tree structure, open the entry Ports with a double click and select the interface, e.g. Communications Port (COM1) with a double click. - Select the Connection settings tab. - Enter the settings for the interface: Baud rate:2400 Data bits:8 Parity:None Stop bits:2 Protocol:None Confirmwith OK. 4. Radio clock installation - Insert the installation CD. - Call up Setup.exe in Windows® XP Explorer. - Select Install server and click Next. - Select the target directory for the program. Click Next, if you want to use the default path or click Browse to select another one. - Follow the on-screen instructions. 5. Once installed, configure the Time Synchronization program. - Select Start > Control Panel > NeoClock Time Synchronization. - Make the following settings in the configuration menu: Language: German Port: COM x (interface used) Synchronization: Select Automatic Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09

Section	Page
1 Safety Notes	7
2 Introduction	11
2.1 System Description	11
2.2 Unpacking	11
2.3 Power	11
2.4 Environmental	11
2.5 Recommended Virus Scanners/Firewall	12
2.5.1 Virus Scanners	12
2.5.2 Firewall	12
2.6 System Overview/Technical Specifications	14
2.6.1 DiBos	14
2.6.2 DiBos micro	18
3 Device Connections	21
3.1 DiBos	21
3.1.1 DiBos Front View	21
3.1.2 DiBos Rear View	22
3.1.3 Grabber Card for DiBos	23
3.1.4 I/O Card for DiBos	24
3.2 DiBos micro	25
3.2.1 DiBos micro Front View	25
3.2.2 DiBos micro Rear View	26
3.2.3 Grabber Card for DiBos micro	27
3.2.4 I/O Card (for DiBos micro)	28
4 Quick Installation	30
5 Quick Configuration	31
5.1 General Settings	31
5.2 Creating a User	33
5.3 Setting up the Network	34
5.4 Specifying Cameras	36
5.5 Assigning Time Profiles	37
5.6 Setting Up Recording	38
6 Default Configuration	40
6.1 Configuring Drives	40
6.2 Configuring Video and Audio Connections	42
6.2.1 General Camera Settings	44
6.2.2 Setting up Dome Cameras and Pan/Tilt Cameras	46
6.2.3 Specifying Monitoring Zone for Motion Cameras	49
6.2.4 Configuring Tamper Detection	50
6.2.5 Configuring Video Monitors	52
6.2.6 Configuring camera sequence	53
6.2.7 Editing Audio Settings	54
6.2.8 Configuring JPEG IP Cameras	55
6.2.9 Configuring MPEG4 IP Cameras	58
6.3 Configuring Recording Settings	60
6.3.1 Configuring Recording Settings for Analog Cameras	60
6.3.2 Configuring Recording Settings of JPEG IP Cameras	67
6.3.3 Configuring Recording Settings of MPEG4 IP Cameras	69
6.4 Configuring Time Periods	71
6.5 Configuring Inputs and Outputs	73
6.5.1 Configuring Alarm Inputs	73
6.5.2 Configuring Relay Outputs	74
6.5.3 Configuring Alarm Simulation	75
6.5.4 Configuring Virtual Inputs	76
6.5.5 Configuring Automatic Teller Machines	77
6.5.6 Configuring Foyer Card Readers	79
6.5.7 Configuring AP Inputs	82
6.5.8 Configuring POS Inputs	86
6.5.9 Configuring ATM/POS Inputs	88
6.6 Configuring Alarm Processing	90
6.7 Configuring Remote Stations	94
6.8 Configuring Alarm Transmission	97
6.9 Configuring the Export Video Scheduler	100
6.10 Creating Authorization Levels	102
6.11 Configuring Users	107
6.12 Configuring Error Forwarding	109
6.13 Configuring Options	111
6.13.1 MIB List for SNMP	114
6.13.2 Notification via SNMP	115
6.13.3 Configuring Automatic Alarm Recording	116
6.14 Configuring Browser Access and Network Settings	117
6.15 Administration and Dongle	119
6.15.1 Activating a License	122
7 Remote configuration	123
8 XP Administration	124
8.1 Logging On as a Windows® XP User	124
8.2 Logging On as a Windows® XP Administrator	124
8.3 Changing the Administrator Password	124
9 Connections	125
9.1 Network Connection via DSL	125
9.2 Connecting the ISDN Controller	128
9.3 Connecting VSCom 200 H (Interface Expansion)	129
9.4 Connecting External Hard Disks	129
9.5 Connecting a Malfunction Relay	129
9.6 Connecting an ATM (Serial)	130
9.7 Connecting the MINITER RS 485 Foyer Card Reader	134
9.8 Connecting the DCF 77 Radio Clock	137
9.9 Connecting a Modem/ISDN Card (for Incoming Connections)	139
9.10 Connecting to AutoDome/SAE Dome	141
9.10.1 Connecting to Bosch Dome Cameras (Directly)	141
9.10.2 Connecting to Bosch Dome Cameras via Matrix Switch	141
9.10.3 Connecting to SAE Dome Cameras (Directly)	142
9.10.4 Connecting to SAE Dome Cameras with V3032 Biphase Interface	142
9.11 Connecting an AP	143
9.11.1 General	143
9.11.2 Connecting to NZ 500 (20 mA) Video System NZ 500	145
9.11.3 Connecting to BZ 500 (20 mA)	145
9.11.4 Connecting to AZ 1010/NZ 1008	146
9.11.5 Connecting to NZ 1012	147
9.11.6 Connecting to NZ 1060	148
9.11.7 Connecting to UEZ 1000 (20 mA)	149
9.11.8 Connecting to UEZ 2000 (20 mA)	149
9.11.9 Connecting to UGM 2020	150
10 Troubleshooting and Checks	151
10.1 Troubleshooting	151
10.2 Checking the Optional Network Connection	152
10.3 Checking the Optional ATM Connection	153
10.4 Checking the Optional Web Connection	154
11 Notes on Service and Maintenance	155
11.1 Maintenance Work to be Carried Out	155
11.2 Software Update	156

Match case Limit results 1 per page

DiBos/DiBos Micro

Connections | en

137

Bosch Sicherheitssysteme GmbH

Installation Guide

F.01U.033.308 | V7 | 2009.09

9.8

Connecting the DCF 77 Radio Clock

The radio clock is connected via a serial interface.

When retrofitting, the following installation must be carried out. Use the supplied installation

CD.

Connect the radio clock to the serial interface.

Log on as Administrator.

Select the interface.

–

Select

Start

Control Panel

System

–

Select the

Hardware

tab and click

Device Manager

–

In the tree structure, open the entry

Ports

with a double click and select the

interface, e.g.

Communications Port (COM1)

with a double click.

–

Select the

Connection settings

tab.

–

Enter the settings for the interface:

Baud rate:2400

Data bits:8

Parity:None

Stop bits:2

Protocol:None

Confirmwith

Radio clock installation

–

Insert the installation CD.

–

Call up

Setup.exe

in Windows® XP Explorer.

–

Select

Install server

and click

–

Select the target directory for the program. Click

, if you want to use the default

path or click

Browse

to select another one.

–

Follow the on-screen instructions.

Once installed, configure the

Time Synchronization

program.

–

Select

Start

Control Panel

NeoClock Time Synchronization

–

Make the following settings in the configuration menu:

Language:

German

Port:

COM x

(interface used)

Synchronization: Select

Automatic

To be carried out by authorized personnel only!

NOTICE!

Only the NeoClock DCF 77 radio clock may be used.

Video system

COM x

Radio clock connecting

cable

DCF 77