Bosch DB18C3100R2 Installation Guide - Page 58
Configuring MPEG4 IP Cameras, Video and audio connections, MPEG4 IP cameras, Alarm processing
View all Bosch DB18C3100R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
58 en | Default Configuration DiBos/DiBos Micro 6.2.9 Configuring MPEG4 IP Cameras Video and audio connections menu > MPEG4 IP cameras section > Edit button In this menu, only MPEG4 units from Bosch from which MPEG4 images can be called up can be configured (e.g. VideoJet, VIP). Depending on the model, a maximum of 32 network devices (JPEG cameras and MPEG4 devices from Bosch) can be connected. 1 Camera name Device type: Select the MPEG4 device you require. IP address: Enter the address (URL) of the MPEG4 device. Channel: Select the channel of the MPEG4 device. Name: Enter the name of the MPEG4 device. The choice of name is up to you. Live stream: Select the stream of the MPEG4 device (Stream 1 or Stream 2) to be used for viewing live images. Motion detection Activates the motion detection of the MPEG4 device in DiBos. Note: - Motion detection must also be activated on the MPEG4 device. - Under Alarm processing, the name of the MPEG4 device appears in the Trigger section. The trigger can, for example, be selected so that it controls recording. To do so, you must select the job you require. Reference image check Activates the reference image check of the MPEG4 device in DiBos. Note: The reference image check must also be activated on the MPEG4 device. F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH