Bosch DB18C3100R2 Installation Guide - Page 155
Notes on Service and Maintenance, 11.1 Maintenance Work to be Carried Out
View all Bosch DB18C3100R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
DiBos/DiBos Micro Notes on Service and Maintenance | en 155 11 11.1 Notes on Service and Maintenance Maintenance Work to be Carried Out Perform the following maintenance work: - On the video system itself: - check that all cables are connected firmly - check the fans and clean if necessary - clean the screen if dirty - check the system time and set if necessary - Check the quality of the last five saved images per camera (e.g. sharpness, brightness, contrast). - The images stored in the archives must be randomly checked (with regard to image quality and additional data) - At least one trigger by a connected AP or a directly connected contact must be undertaken. The images placed in the archives as a result of this action must be checked and then deleted. - The hard disk load must be checked. In agreement with the customer, it may be necessary to delete images. - All freely accessible cameras and lenses as well as dome cameras and front screens of external cameras should be cleaned. While doing so, the connecting cables and plugs must be checked. - The reference images printed or saved during installation of the system must be compared with the live images of the corresponding cameras with regard to their alignment. The customer is answerable to the administrative association (BGV) with regard to setting the image frame size. - A functional test in accordance with UVV Kassen must be carried out at least once per month. The SP 9.7/7 Requirements for testing of optical room monitoring systems must be taken into account. - Checking of the customer-owned printer (1 printout). - A test connection is to be set up for the ISDN connection. - For ATM connection: - check the connecting cables on the interface processor and on the OVS - check the transmission of the transaction data - access control data display (check the access control connection cable) - All work carried out is to be documented in the operating handbook. NOTICE! All work on the system that affects recording may only be carried out with the prior agreement of the customer. For UVV-relevant devices, it is preferable that this work is carried out outside of counter opening times. If defective, the system (without dongle) is to be exchanged. A loan device will be made available by the video system manufacturer during this time. Maintenance work to be carried out by the operator The operator must: - replace the toner cartridge for laser printers, - replenish printer paper or the video printer paper cartridge, and - replace the color cartridge for ink jet printers. Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09