Bosch DB18C3100R2 Installation Guide - Page 24
I/O Card for DiBos, NOTICE
View all Bosch DB18C3100R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 en | Device Connections DiBos/DiBos Micro 3.1.4 I/O Card for DiBos The following can be set for the I/O card: - the relay outputs (NO = normally open, NC = normally closed) - the malfunction outputs (NO = normally open, NC = normally closed) 1 Relay outputs: The setting is printed on the PCB. Relay outputs 1-8: open (NO = normally open) Relay outputs 9-16: closed (NC = normally closed) 2 Malfunction output: The setting is printed on the PCB. Bridge position up: Open (MAL NO = malfunction normally open) Bridge position down: Closed (MAL NC = malfunction normally closed) NOTICE! The I/O card must be removed to change the bridge settings. F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
24
en | Device Connections
DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09
Installation Guide
Bosch Sicherheitssysteme GmbH
3.1.4
I/O Card for DiBos
The following can be set for the I/O card:
–
the relay outputs (NO = normally open, NC = normally closed)
–
the malfunction outputs (NO = normally open, NC = normally closed)
1
Relay outputs:
The setting is printed on the PCB.
Relay outputs 1–8: open (NO = normally open)
Relay outputs 9–16: closed (NC = normally closed)
2
Malfunction output:
The setting is printed on the PCB.
Bridge position up:
Open (MAL NO = malfunction normally open)
Bridge position down:
Closed (MAL NC = malfunction normally closed)
NOTICE!
The I/O card must be removed to change the bridge settings.