Bosch SRV53C13UC Instructions for Use - Page 64
Dishwasher Installation Instructions for 18-inch Models - tools
View all Bosch SRV53C13UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Dishwasher Installation Instructions for 18-inch Models English/French/Spanish Table of Contents Read these Installation Instructions completely and follow them carefully. IMPORTANT INSTRUCTIONS 1 Tools Needed 2 Materials Needed 2 Materials Supplied 3 Enclosure Preparation 4 Electrical Preparation 5 Plumbing Preparation 7-8 Plumbing 9 Securing the Dishwasher 11 Placing the Dishwasher 12 Door Panel Installation 13 Final Instructions 13 Customer Service 14 Important Safety Instructions WARNING To avoid possible injury or property damage, OBSERVE ALL WARNINGS AND CAUTIONS. These instructions are intended for use by qualified installers only. The dishwasher must be installed by a qualified service technician or installer. • In addition to these instructions, the dishwasher shall be installed to meet all electrical and plumbing codes and ordinances (both national and local). Read these installation instructions completely and follow them carefully. They will save you time and effort and help to ensure safety and optimum dishwasher performance. If the dishwasher is installed in a location that experiences freezing temperatures (e.g., in a holiday home), you must drain all the water from the dishwasher's interior. Water system ruptures that occur as a result of freezing are NOT COVERED BY WARRANTY. IMPORTANT • The dishwasher drain hose must be installed with a portion of it at least 20" (508mm) off the cabinet floor; otherwise the dishwasher may not drain properly. • This dishwasher is intended for residential use only, and should not be used in commercial food service establishments. • NEW INSTALLATION - If the dishwasher is a new installation, most of the work must be done before the dishwasher is moved into place. • REPLACEMENT - If the dishwasher is replacing another dishwasher, check the existing dishwasher connections for compatibility with the new dishwasher, and replace parts as necessary. • This appliance has been found to be in compliance with CAN/CSA-C22.2 No. 167/UL 749. It is the responsibility of the owner and the installer to determine if additional requirements and standards apply in specific installations. Inspect the Dishwasher After unpacking the dishwasher and prior to installation, thoroughly inspect the dishwasher for possible freight or cosmetic damage. Report any damage immediately. Cosmetic defects must be reported within 30 days of installation. NOTE: Do not discard any bags or items that come with the original package until after the entire installation has been completed. · 9000067878 REV A 09/05 1