Bosch SRV53C13UC Instructions for Use - Page 9
Loading the Bottom Rack
View all Bosch SRV53C13UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Preparing and Loading the Dishware (continued) Knife Rack The knife rack is an extra shelf for knives and other large utensils. It is assembled onto an edge of the upper rack. Place knives with sharp sides down, see Figure 5. Figure 5 Bottom Rack Accessories Flip Tines Flip Tines fold down to make loading the racks easier in some instances. Grasp the Figure 7 tines as shown in Figure 7 and fold the tines downward. Knife Rack Loading the Bottom Rack Place large items in the bottom rack. Load pots and pans upside-down. Figure 6 shows a typical mixed load for the bottom rack. Figure 6 9 place setting Loading Extra Tall Items If an item is too tall to be placed into the bottom rack even with the top rack in the raised position, Remove the empty top rack by pulling it out of the dishwasher until it stops rolling. Pull the front of the rack upward and outward until the rollers are completely free of the roller guides. Set the top rack aside. Figure 8 Push the roller guides back into the dishwasher. Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock it into position as shown in Figure 8. NOTE: Keep the vent on the tub's right side clear by placing tall items such as plastic cutting boards and tall baking sheets on the bottom rack's left side, center, or back. 7