Bosch SRV53C13UC Instructions for Use - Page 65

Tools Needed, Materials Needed - hammer drill

Get Bosch SRV53C13UC PDF manuals and user guides View all Bosch SRV53C13UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

TOOLS NEEDED Tools and Materials Needed Hammer Hole Saw Pipe Wrench Adjustable Wrench Tape Measure Slot Screwdriver Phillips Screwdriver T-20 Screwdriver Wire Cutter Wire Stripper Drill Level MATERIALS NEEDED (Additional materials may be required to comply with local codes.) Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper conductors rated 75°C or higher. Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher supply line. Shut-off valve and fittings appropriate for hot water supply line (copper tubing/ compression fitting, or braided hose). Teflon brand tape or other pipe thread compound to seal plumbing connections. UL listed conduit connector or strain relief. Although a strain relief is included on the junction box, a separate strain relief may be required if you attach the field wiring directly to the terminal block. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
2
TOOLS NEEDED
Hammer
Hole Saw
Pipe Wrench
Tape Measure
Slot Screwdriver
Phillips Screwdriver
T-20 Screwdriver
Wire Cutter
Wire Stripper
Drill
Level
Adjustable Wrench
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper
conductors rated 75°C or higher.
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher
supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose).
Teflon brand tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief. Although a strain relief is included on the
junction box, a separate strain relief may be required if you attach the field wiring
directly to the terminal block.
MATERIALS NEEDED
(Additional materials may be required to comply with local codes.)
Tools and Materials Needed