Bosch SRV53C13UC Instructions for Use - Page 74

Top Mount Figure 14 Side Mount Figure 15 Dishwasher Placement FINAL STEPS • Installing the Mounting Brackets • Sliding the dishwasher into place • Leveling the dishwasher • Securing the unit • Attaching the toe panel CAUTION When any covers are removed or the dishwasher is out of the cabinet, electrical power and sharp edges or points may be exposed. Installing the Countertop Mounting Brackets Before installing the supplied countertop mounting brackets, decide which method of securing the dishwasher into its enclosure will be used. Once the mounting brackets are installed on the dishwasher, removing them is difficult and will damage the mounting brackets and the dishwasher. The dishwasher can be secured into its enclosure in two ways: 1 Top Mount is used for countertops made of wood or other materials that can easily drilled. Orient the mounting brackets as shown in Figure 14, and position the two small tabs on the mounting brackets over the two slots on the dishwasher's front corners. Push the mounting brackets down firmly to insert the tabs into the slots. 2 Side Mount is used for countertops made of marble, granite, or other very hard materials that cannot be easily drilled. Bend the mounting brackets along the small holes and in the same direction as the two small tabs. Orient the mounting brackets as shown in Figure 15, and position the two small tabs on the mounting brackets over the two slots on the dishwasher's front corners. Push the mounting brackets down firmly to insert the tabs into the slots. WARNING Avoid Tip Over Hazard Do not use the dishwasher until it is completely installed. When opening the door on an uninstalled dishwasher, carefully open the door while supporting the rear of the unit. Failure to follow this warning can result in serious injury. 11