Bosch WTMC3321US Use & Care Manual (all languages) - Page 9
Check, list before, using, the dryer, Preparing, to transport, dryer ć - troubleshooting
UPC - 825225844761
View all Bosch WTMC3321US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Check list before using the dryer 1. Check that steps 1-12 have been implemented properly. 2. Ensure that the dryer is connected to the power supply. 3. Read the operating instructions to understand how your dryer operates. 4. Conduct an appliance test: q Check that the drum is empty. q Close the dryer door. q Switch the dryer to "Extra Dry" and then press the Start button. q After 3-5 minutes press the Stop button and open the door. 5. If the interior of the dryer feels warm, the dryer has been connected properly. Switch the dryer to "OFF". 6. If the dryer does not work, switch the dryer to "OFF". Look in the troubleshooting section (page 19) of the OPERATING INSTRUCTIONS and find the fault. Preparing to transport the dryer ć step by step 1. Rotate the program selector to "OFF". 2. Pull out the power supply plug. 3. Disconnect the exhaust duct from the exhaust air outlet on the dryer. 4. Place any accessories in the drum. 5. Close the door and secure with adhesive tape. 6. Screw the heightĆadjustable feet of the dryer into the housing to prevent them from being damaged during transportation. 9