Bose 43406 User Manual - Page 16

SYSTEM OPERATION SYSTEM OPERATION 16 Français Español English Here's how to begin: 1. Place the first CD into the disc tray of the media center and close the tray. 2. Press the Store button, located on the media center control panel. • During this process, the media center displays the message CD STORING and shows what percentage of the task is completed. • To interrupt or stop the storing activity at any time, simply open the disc tray. • To resume storing the same disc, close the tray and press the Store button again. 3. When it reaches 100% and displays the text AUDIO CD STORED, remove the disc and repeat steps 1-3 for each additional CD. Storing takes about 5 minutes per disc. For more details, see "Planning time to store your music" on page 50. The basics of your uMusic® intelligent playback system 1. Press Stored to select the stored music source. If the system is off, this will turn it on in the uMusic® system mode. It begins with the last-used preset. 2. Now you can simply sit back and listen, or make other choices: • Press any number button, 1 through 9, to choose a different preset. • Press - or + rating buttons if you have a particularly strong reaction to a selection. Note: Pressing - (minus) registers your displeasure with the current track, so the system moves immediately to a new track. Use this rating when you hear a track that is inappropriate for the selected preset and you want to lessen your chance of hearing the track again. Pressing + (plus) sends a strong message that the current track is pleasing and music like it is appropriate for the selected preset. • Press Encore to hear only music similar to the piece playing. The system checks the music databases and selects only those tracks in your collection with very similar attributes, so you can count on it to mirror that mood. • Press Whole CD to hear the other tracks, in the order arranged, on the same CD. • Press CD#, followed by its reference number, to move to a specific CD and hear all the tracks on it. Note: You can refer to the log at the back of the book (if you have noted your CDs there as you stored them) to quickly locate the reference number for a CD you want to hear. Your remote control options When you want to: Press: Pause the selection playing... Resume play of a paused selection... . or . Stop a selection... Move to another selection... once. Then to resume where it stopped. Or, twice to stop and reset. Then the beginning of the track or whole CD. to restart at up. Does not change stored music presets. Move to a previous selection... down twice, or once only, if the track you want to skip has barely begun playing. Does not change stored music presets.