Bose 43406 User Manual - Page 54

REFERENCE REFERENCE Figure 26 Miniature switches on the Primary remote are set for use in the Main room (A) Français Español English Using the media center: 1. Lift the media center door and press the All Off button. 2. Press and hold the Enter button. Your current house code will appear in the media center display window in the form of four rectangles, which represent the positions of switches 1 through 4: HOUSE CODE: Switches 1 - 4 down = 0 0 0 0 (current house code) 3. While holding the Enter button, press any button on the remote control. The media center displays the new house code, which confirms its recognition of the new code: NEW HOUSE CODE: (Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0 (new house code) 4. Release the Enter button. The system remains off. 5. If you have additional remote controls, change the switches to match those of the first remote control by following steps 1-3 above. You do not need to repeat steps 4-5. Note: To verify your system's house code, press Enter while the system is off. The display confirms the settings of switches 1-4. Switches (1-4) as set at the factory: all switches down. 1 2345 6789 Other switches Switch 5 determines which "audio stream" (of two) you hear. For more information on streams, refer to "Setting up a second room with sound" on page 55. Switches 6-9 represent the room where the remote will be used. In the main room, the primary remote is set as Room A with all switches down. 1 2345 6789 For a Bose® link remote in another room Switches 1-4 need to match those switch settings in your main remote. Set switches 5-9 for the room where you will use the Bose® link remote. Protecting and caring for your system Follow the guidelines below when cleaning the surfaces. • Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. • Do not use any sprays near the system. Cleaning the media center Use only a soft, dry cloth to clean the outside of the media center. 54