Bose Acoustimass 16 Series II Owner's guide - Page 4

Français Español English SETTING UP Before you begin We appreciate your choice of the Bose® Acoustimass® 16 Series II or 15 Series III home ! entertainment speaker system. Each system features a combination of cube speaker arrays, center front speaker, and a powered Acoustimass module. Together, they reproduce the ! full-spectrum sound of multi-channel digital programming for a powerful and realistic home theater experience. Unpacking the carton Carefully unpack the carton contents as follows: 1. Remove the brown inner carton containing the cube speaker arrays and center front speaker. 2. Gently roll the large carton onto its side and pull out the Acoustimass module. WARNING: To avoid injury, use care in lifting the module, which weighs 33 pounds (15 kg). Save all packing materials, which provide the best means to transport the system, for ! possible future use. If any parts appear damaged, do not use them. Instead, repack the system in the original ! carton and contact your authorized Bose dealer. Or, to contact Bose directly, refer to the address list included in the carton. Figure 1 Carton contents 20-ft (6.1 m) system input cable Acoustimass module Rubber feet With Acoustimass 15 Series IIl system Three 20-ft (6.1 m) front speaker cables With Acoustimass 16 Series II system Four cube array speakers Center front speaker Two 50-ft (15.2 m) rear speaker cables Five cube array speakers Center front speaker Three 50-ft (15.2 m) rear speaker cables U.S.A/Canada Power cord (1) Europe U.K./Singapore Australia Now is a good time to record the serial number for this system on page 2 of this guide and on your warranty card. WARNING: To avoid danger of suffocation, keep the plastic bags that wrap these speakers out of the reach of children. 4