Bose F1 Model 812 Flexible Array Loudspeaker With F1 Subwoofer Multilingual Ow - Page 11
F1 Subwoofer Control Panel, Operation
View all Bose F1 Model 812 Flexible Array Loudspeaker With F1 Subwoofer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Operation F1 Subwoofer Control Panel Note: For a complete list of LED indications and behaviors, see "LED Indicators" on page 19. LINE OUTPUT 1 & 2: Individual outputs that provide balanced line output signals (pre-volume control) that can be sent to powered loudspeakers or additional subwoofers. Note: When the LINE OUTPUT EQ selector switch is set to THRU, the LINE OUTPUT signal will be full range. LINE INPUT 1 & 2: Combination XLR - ¼" phone connector inputs that accept line level signals. POLARITY: • NORM is used when when the F1 Model 812 loudspeaker is mounted on the supplied stand. • REV may be used to better align the bass when the subwoofer is located further away from the F1 Model 812 loudspeaker. FRONT LED selector switch: • POWER enables LED to indicate power status. • LIMIT enables LED to indicate limiting. • OFF turns off LED. POWER/FAULT: indicates power/fault status • Blue = power on. • Red = fault condition. LIMIT: Amber = system limiting. SIGNAL/CLIP: Displays the input signal status in color. • Green = signal present. • Red = signal clipping - input signal too high. VOLUME - Adjusts subwoofer volume. Middle detent position is 0dB - nominal position when the F1 Model 812 and F1 Subwoofer are connected to a mixing console. Use 0dB position for a line-level signal input. LINE OUTPUT EQ: (See "Setting EQ selector switches" on page 12.) • THRU passes input signal to the output with no filtering. Recommended when using with F1 Model 812. • HPF passes input through a high-pass (100 Hz) filter. Affects LINE OUTPUT signals only. AC input connector. POWER on/off switch. English - 11