Bose F1 Model 812 Flexible Array Loudspeaker Multilingual Owners Guide - Page 12
Power On/Off Sequence, Setting EQ selector switches, Connecting Sources
View all Bose F1 Model 812 Flexible Array Loudspeaker manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operation Power On/Off Sequence When turning the system on, turn on input sources and mixing consoles first and then turn on the F1 Model 812 Loudspeaker and the F1 Subwoofer. When turning the system off, turn off the F1 Model 812 and F1 Subwoofer first followed by input sources and mixing consoles. Setting EQ selector switches Recommended settings for the EQ selector switches on the F1 Model 812 Loudspeaker and the F1 Subwoofer are describe in the following table. System Setup F1 Model 812 EQ Switch F1 Model 812 Loudspeaker used without F1 Subwoofer FULL RANGE Signal input to F1 Subwoofer, F1 Subwoofer output to F1 Model 812 Loudspeaker WITH SUB Signal input to F1 Model 812 Loudspeaker, F1 Model 812 output to F1 Subwoofer FULL RANGE or WITH SUB* *Provides more bass extension. F1 Subwoofer LINE OUTPUT EQ Switch Not applicable THRU No affect Connecting Sources Before plugging in a sound source, turn the VOLUME control of the channel fully counter-clockwise. The two independent inputs provide a combination of input connectors that can accomodate microphone and line-level sources. Note: Only dynamic or self-powered microphones can be used for INPUT 1. Setting Up INPUT 1 with a Microphone 1. Turn the INPUT 1 VOLUME fully counter-clockwise. 2. Set the SIGNAL INPUT switch to MIC. 3. Plug the mic cable into the INPUT 1 connector. 4. Adjust the VOLUME to your desired level. Setting Up INPUT 1 with a Source 1. Turn the INPUT 1 VOLUME fully counter-clockwise. 2. Set the SIGNAL INPUT switch to LINE LEVEL. 3. Plug the source cable into the INPUT 1 connector. 4. Adjust the VOLUME to your desired level. 0 dB (detent) Setting Up INPUT 2 with a Source 1. Turn the INPUT 2 VOLUME fully counter-clockwise. 2. Plug the source cable into an INPUT 2 connector. 3. Adjust the VOLUME to your desired level. 0 dB (detent) 12 - English