Brother International 5100c Users Manual - English - Page 189

STEP B: Alignment Check The LCD shows: IS STEP "B" OK? 1.YES 2.NO Check the 600 DPI and 1200 DPI test prints to see if number 5 most closely matches number 0. If the number 5 sample of both the 600 DPI and 1200 DPI are the best matches, press 1 (YES) to finish STEP B--OR-- If another test print number is a better match for either 600 DPI or 1200 DPI, press 2 (NO) to select it. Do NOT select } 600 DPI } 1200 DPI For 600 DPI, press the number of the test print that most closely matches the number 0 sample (1-8). 600DPI ADJUST SELECT BEST # For 1200 DPI, press the number of the test print that most closly matches the number 0 sample (1-8). 1200DPI ADJUST SELECT BEST # 4 Repeat Steps 1 and 2 (in Print Quality Check) to print another sample Print Quality Check Sheet and then check it. 5 Press Stop/Exit. When an ink head nozzle is clogged the printed sample looks like this. After the ink head nozzle is cleaned, the horizontal lines are gone. 19 - 11 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E