Brother International 5100c Users Manual - English - Page 84
Remote Commands, Operation Details
UPC - 012502565826
View all Brother International 5100c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Remote Commands Follow the commands below to access features remotely. When you call the MFC and enter your Remote Retrieval Access Code (1 5 9 ), the system will signal you with two short beeps to enter a remote command. Remote Commands Operation Details 95 Change Fax Forwarding /Paging setting 1 OFF 2 Fax Forwarding 3 Paging 4 FAX FWD No. If you hear one long beep, the change is accepted. If you hear three short beeps, you cannot change it because the conditions have not been met (Example: registering paging number). You can register your fax forwarding number by using 4. FAX FWD NO. (see page 8-5). Once you have registered the number, the MFC will change automatically to FAX FWD:ON mode. 6 Fax Storage ON You can turn FAX STORAGE to ON or OFF. 7 Fax Storage OFF 96 Retrieve a fax 2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax message(s). (See page 8-5.) 3 Erase faxes from the memory If you hear one long beep, you can erase fax messages from the memory. 97 Check the Receiving Status 1 FAX You can check whether your MFC has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. 98 Change the Receive Mode 1 EXT.TEL/TAD 2 FAX ONLY If you hear one long beep, you can change the Receive Mode. If you hear three short beeps, you cannot change it. 90 Exit After a long beep, you can exit Remote Retrieval. REMOTE FAX OPTIONS (NOT AVAILABLE FOR COLOR FAX) 8-4