Brother International DCP-8060 Quick Setup Guide - English - Page 6
Step1 Setting Up the machine, 1 Install the Drum Unit and Toner Cartridge Assembly
UPC - 012502615064
View all Brother International DCP-8060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Step 1 Setting Up the machine 1 Install the Drum Unit and Toner Cartridge Assembly Do NOT connect the interface cable. Connection the interface cable is done during the software installation process. 2 Unpack the drum unit and toner cartridge assembly. 1 Open the front cover by pressing the front cover release button (1). 3 Gently rock the drum assembly from side to side several times to distribute the toner evenly inside the cartridge. 4 Put the drum unit and toner cartridge into (1) the machine so that it clicks into the place. 5 Close the front cover of the machine. 4
4
Setting Up the machine
Do NOT connect the interface cable.
Connection the interface cable is
done during the software
installation process.
1
Open the front cover by pressing the front
cover release button
(1)
.
2
Unpack the drum unit and toner cartridge
assembly.
3
Gently rock the drum assembly from side to
side several times to distribute the toner
evenly inside the cartridge.
4
Put the drum unit and toner cartridge into
the machine so that it clicks into the place.
5
Close the front cover of the machine.
1
Install the Drum Unit and Toner Cartridge Assembly
(1)
Step 1