Brother International DCP-8060 Quick Setup Guide - English - Page 7
Load Paper in the Paper Tray
UPC - 012502615064
View all Brother International DCP-8060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Setting Up the machine Windows® USB 2 Load Paper in the Paper Tray 1 Pull the paper tray completely out of the machine. 3 Fan the stack of paper well to avoid paper jams and misfeeds. 4 Put paper in the paper tray. Check that the paper is flat in the tray and below the maximum paper mark (1). 2 While pressing the blue paper guide release lever (1), slide the adjusters to fit the paper size. Check that the guides are firmly in the slots. (1) (1) Windows® Parallel Windows NT® 4.0 Parallel Windows® Network Macintosh® USB Macintosh® Network For Legal size paper, press the lever (1) located at the back of the tray and pull out the back of the paper tray. Move the tray lock button (2) to the lock position. (1) (2) 5 Put the paper tray firmly back into the machine and unfold the support flap (1) before you use the machine. (1) For details on supported paper specifications, see "Acceptable paper and other media" in Chapter 2 of the User's Guide. 5 Network Administrators