Brother International Entrepreneur Pro PR1000e Users Manual - English - Page 108

OTHER BASIC PROCEDURES Note ● The built-in camera may not be able to detect the embroidery positioning sticker if the four corners of the sticker are not firmly affixed to the fabric. Use tape to firmly affix the sticker to the fabric. ● When using the optional cap frame or cylinder frame, attach the embroidery positioning sticker so that the two circles of the positioning mark fit within one of the embroidering areas. ● If the embroidery positioning sticker has been affixed over two areas, the sticker will be detected no matter which of the two areas is selected. When the machine's built-in camera has 6 finished detecting the location of the embroidery positioning sticker, the following message appears. Touch . 4 When the following message appears, touch 5 . Memo ● You can touch to confirm the embroidery position is correctly aligned before removing the embroidery positioning sticker. • Touch to display the grid lines which would make it easier to find the position. • Touch for the closer image. • Touch again to return to the previous screen. Remove the embroidery positioning sticker 7 from the fabric. X The built-in camera automatically detects the embroidery positioning sticker, and then the embroidery frame is moved so that the center of the embroidery pattern is aligned with the center of the large circle in the embroidery positioning sticker. 106