Brother International Innov-ís 4000D Users Manual - English - Page 39
Be sure to pass the thread along the right
View all Brother International Innov-ís 4000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
UPPER THREADING f Push the spool cap onto the spool pin as far as possible, then return the spool pin to its original position. i Pull the thread under the thread path guide. CAUTION • If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin and cause the needle to break. • Use the spool cap (large, medium, or small) that is closest in size to the thread spool. If a spool cap smaller than the thread spool is used, the thread may become caught in the slit on the end of the spool and cause the needle to break. g Holding the thread the thread into the with both hands, slide grooves on the thread guide plate. a (aA) a Thread path guide j Pull back up the thread along the left side of the thread path guide to the top left corner of the threading path cover. (aB) a a Thread guide plate h While hand, holding the thread in your right use your left hand to pull the thread toward the threading path cover, then pass it along the thread path as shown in the illustration. Be sure to pass the thread along the right side of the thread path guide. b a Top left corner b Threading path cover k Pull the thread back down to the needle bar along the left side of the thread path guide. * Make sure the thread is hooked at the top corner and positioned behind the transparent front cover. a 1a b a Threading path cover b Thread path guide (bC) a Thread take-up lever check window b Transparent front cover Memo a a bb a Take-up lever b Thread Look through the thread take-up lever check window and check that the thread is correctly fed through the take-up lever, turning the handwheel toward you. 28