Brother International Innov-ís 4000D Users Manual - English - Page 66
Changing the Needle Position Left, or Middle Needle Position Stitches, Using the Straight Stitch
View all Brother International Innov-ís 4000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
■ Changing the Needle Position (Left or Middle Needle Position Stitches Only) When you select left or middle needle position stitches, you can use and in the stitch width display to change the position of the needle. Match the distance from the right edge of the presser foot to the needle with the stitch width, then align the edge of the presser foot with the edge of the fabric during sewing for an attractive finish. SEWING THE STITCHES ■ Using the Straight Stitch Needle Plate and the Straight Stitch Foot The straight stitch needle plate and the straight stitch foot can only be used for straight stitches (middle needle position stitches). Use the straight stitch needle plate and the straight stitch foot when sewing thin fabrics or when sewing small pieces which tend to sink into the hole of the regular needle plate during sewing. The straight stitch foot is perfect to reduce puckering on lightweight fabrics. The small opening on the foot provides support for the fabric as the needle travels through the fabric. CAUTION Always use the straight stitch foot in combination with the straight stitch needle plate. a 3 a Press the "Presser Foot Lifter" raise the presser foot and turn button to the main power to OFF. Utility Stitches a Stitch width Example: Left/Middle needle position stitches b Remove the flat bed attachment or the embroidery unit if either are attached. c Grasp both sides of the needle and then slide it toward you. plate cover, J J J J a 12.0 mm (approx. 1/2 inch) 8.5 mm (approx. 11/32 inch) 6.5 mm (approx. 1/4 inch) 5.0 mm (approx. 3/ 16 inch) Memo For a standard 16 mm (approx. 5/8 inch) seam allowance, set the width to 0 mm on the screen. While sewing, align the edge of the fabric with the 16mm (approx. 5/8 inch) mark on the needle plate. J a Needle plate cover d Grasp the bobbin case, and then pull it out. a a Bobbin case e Use the screwdriver included with the machine to unscrew and remove the regular needle plate. a a 16 mm (approx. 5/8 inch) 55