Brother International JS60 Operation Manual - Page 33
Overedge stitching
View all Brother International JS60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Sew 5-6 stitches at a slow speed holding l the fabric with your hands, so that the needle slightly catches the fold of the hem. Sew 5-6 stitches on the fold with the stitch m width set at the right needle position (0 width) and the stitch length set at 2-3. Overedge stitching The Overlock Stitch is used to prevent the edge of the fabric from fraying. Needle Available stitch width ( ) 5 Available stitch length Single 3 3-4 3 Quickly set the width to 3-5, then sew 1 n stitch, and then set the width back to the right needle position. Repeat the steps l - n. o Remove the basting stitching and turn the p fabric right side up. 3-5 Place the edge of the fabric under the presser foot so the needle enters the fabric when the left side of the zigzag stitch is sewn and misses the edge of the fabric with the right side of the stitch. Sew with this needle position along the edge of the fabric. 1 2 1 Wrong side of fabric 2 Right side of fabric 32