Brother International JS60 Operation Manual - Page 41
Satin stitches
View all Brother International JS60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
■ When stretch blind hem stitching When stretch blind hem stitching using the blind stitch foot, turn the screw to adjust the guide to the folded hem. • For more details on blind hem stitching, see page 30. 1 1 Screw 2 Guide 3 Folded hem 2 3 Satin stitches Various decorative stitches can be obtained by sewing with the Satin Stitch when following the instructions below. Lower the needle into the fabric at the a beginning of the stitching. Start sewing. b • For details, refer to "Starting sewing" (Page 23). Sew satin stitches while adjusting the c stitch width by turning the pattern selection dial slowly in the range shown in the table below. Note ● Be sure to turn the pattern selection dial only within the specified range. Needle When sewing is finished, cut the thread. d • For details, refer to "Starting sewing" (Page 23). Available stitch width ( ) 5 Pattern sewn Available stitch length 5 Single 0.5 0.5-5 0-1 (F) Twin 3 0.5 0.5-3 40