Brother International MFC-J480DW Basic Users Guide - Page 23

2 Paper Handling 2 Paper Handling Load Paper Load paper in the paper tray • If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper type and paper size. Change the Paper Size and Paper Type settings if needed, following the on-screen instructions. • Load only one size and type of paper in the paper tray at a time. • When you load a different paper size in the tray, you must change the Paper Size setting in the machine or the paper size setting on your computer. 1 Pull the paper tray completely out of the machine. 3 Gently press and slide the paper width guides (1) and then the paper length guide (2) to fit the paper size. 1 2 When you are using Legal size paper, press the square paper tray expansion button (1) and slide out the paper tray until the square paper tray expansion button locks into the square LGL hole. 1 2 Open the output paper tray cover (1). 1 7