Brother International MFC-J480DW Basic Users Guide - Page 24
IMPORTANT, face down
View all Brother International MFC-J480DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4 Fan the stack of paper well. 5 Gently load paper in the paper tray with the printing surface face down. 6 Gently adjust the paper width guides (1) to fit the paper. Make sure the paper guides touch the edges of the paper. 1 Make sure the paper is flat in the tray and the paper length guide (1) touches the edges of the paper. 7 Close the output paper tray cover. Slowly push the paper tray completely into the machine. 1 IMPORTANT • Be careful not to push the paper in too far; it may lift at the back of the tray and cause paper feed problems. • Loading more than 20 sheets of Photo 2L (5" x 7")/(13 x 18 cm) paper may cause paper jams. 8 While holding the paper tray in the machine, pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2). 2 To add paper before the tray is empty, 1 remove the paper from the tray and combine it with the paper you are adding. Always fan the stack of paper well to prevent the machine from feeding multiple pages. 8