Brother International MFC-J5330DW Online Users Guide HTML - Page 424
Devices and Printers, Hardware and Sound
View all Brother International MFC-J5330DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 424 highlights
4. Using a computer connected to the network, type in your browser's address bar the IP address of the device you are using as the Registrar. (For example: http://192.168.1.2) 5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions. • The Registrar is usually the wireless LAN access point/router. • The settings page will differ depending on the brand of wireless LAN access point/router. For more information, see the instructions supplied with your wireless LAN access point/router. If you are using a Windows Vista, Windows 7, Windows 8, or Windows 10 computer as a Registrar, complete the following steps: 6. Do one of the following: • Windows Vista Click (Start) > Network > Add a wireless device. • Windows 7 Click (Start) > Devices and Printers > Add a device. • Windows 8 Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings > Control Panel > Hardware and Sound > Devices and Printers > Add a device. • Windows 10 Click > All apps > Windows System > Control Panel. In the Hardware and Sound group, click Add a device. • To use a Windows Vista, Windows 7, Windows 8, or Windows 10 computer as a Registrar, you must register it to your network in advance. For more information, see the instructions supplied with your wireless LAN access point/router. • If you use Windows 7, Windows 8, or Windows 10 as a Registrar, you can install the printer driver after the wireless configuration by following the on-screen instructions. To install the full driver and software package, use the Brother installation disc. 7. Select your machine and click Next. 8. Type the PIN displayed on the machine's LCD, and then click Next. 9. Select your network, and then click Next. 10. Click Close. MFC-J5830DW/MFC-J5930DW 1. Press [Settings] > [Wi-Fi] > [WPS w/ PIN Code]. 2. When [Enable WLAN?] appears, press [Yes]. This will start the wireless setup wizard. To cancel, press [No]. 3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router. 4. Using a computer connected to the network, type in your browser's address bar the IP address of the device you are using as the Registrar. (For example: http://192.168.1.2) 5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions. • The Registrar is usually the wireless LAN access point/router. • The settings page will differ depending on the brand of wireless LAN access point/router. For more information, see the instructions supplied with your wireless LAN access point/router. If you are using a Windows Vista, Windows 7, Windows 8, or Windows 10 computer as a Registrar, complete the following steps: 6. Do one of the following: • Windows Vista 417