Brother International MFC-J5330DW Online Users Guide HTML - Page 609
DR Mode in Use, High Temperature, Hub is Unusable., Ink Absorber NearFull, Ink Low, Replace Ink
View all Brother International MFC-J5330DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 609 highlights
Error Message DR Mode in Use High Temperature Hub is Unusable. Ink Absorber NearFull Ink Absorber Pad Full Ink Low Install Ink Jam Front/Rear Jam Front Cause Action The machine is in Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off. See Related Information: Turn off Distinctive Ring. The room temperature is too high. After cooling the room, allow the machine to cool down to room temperature. Try again when the machine has cooled down. A hub or USB flash drive with hub has been connected to the USB direct interface. Hubs, including a USB flash drive with a built-in hub, are not supported. Unplug the device from the USB direct interface. The ink absorber box or flushing box is nearly full. The ink absorber box or flushing box must be replaced soon. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. The ink absorber box or flushing box is The ink absorber box or flushing box must full. These components are periodic be replaced. Call Brother Customer maintenance items that may require Service or a Brother Authorized Service replacement after a period of time to Center to have your machine serviced. ensure optimum performance from your Brother machine. Because these components are periodic maintenance items, the replacement is not covered under the warranty. The need to replace Reasons for cleaning are: 1. The machine automatically cleans itself after you remove the power cord and plug it back in. these items and the time period before 2. After a paper jam has been cleared, replacement is dependent on the number the machine automatically cleans itself of purges and flushes required to clean before the next received page is the ink system. These boxes acquire printed. amounts of ink during the different purging 3. The machine automatically cleans and flushing operations. The number of itself after sitting idle for more than 30 times a machine purges and flushes for days (infrequent use). cleaning varies depending on different situations. For example, frequently powering the machine on and off will cause numerous cleaning cycles since the 4. The machine automatically cleans itself after ink cartridges of the same color have been replaced 12 times. machine automatically cleans upon power up. The use of non-Brother ink may cause frequent cleanings because non-Brother ink could cause poor print quality which is resolved by cleaning. The more cleaning the machine requires, the faster these boxes will fill up. Repairs resulting from the use of nonBrother supplies may not be covered under the stated product warranty. One or more of the ink cartridges are near Order a new ink cartridge. You can the end of their lives. If the sending continue printing until the touchscreen machine has the ability to convert it, the displays Replace Ink. color fax will be printed at your machine as a black & white fax. See Related Information: Replace the Ink Cartridges. • You can still scan even if the ink is low or needs to be replaced. An ink cartridge is not installed correctly. Remove the new ink cartridge and reinstall it slowly and firmly until it locks into place. See Related Information: Replace the Ink Cartridges. The paper is jammed in the machine. Remove the jammed paper. 602