Brother International MFC-J815DW XL Online Users Guide HTML - Page 261

Home > Fax > Receive a Fax > Remote Fax Retrieval > Remote Retrieval Commands Remote Retrieval Commands Related Models: MFC-J995DW Use the Remote Commands in this table to access fax commands and options when you are away from your Brother machine. When you call the machine and enter your remote access code (three digits followed by *), the system will sound two short beeps and you must enter a Remote Command (column 1), followed by one of the options (column 2) for that command. Remote commands 95 Options Change the Fax Forwarding, or Fax Storage settings 1 OFF 2 Fax Forwarding 4 Fax Forwarding number 6 Fax Storage 96 Retrieve a fax 2 Retrieve all faxes 3 Erase faxes from memory 97 Check the receiving status 1 Fax 98 Change the Receive Mode 1 External TAD 2 Fax/Tel 3 Fax Only 90 Exit Operation details You can select Off after you retrieve or erase all your messages. One long beep means the change is accepted. If you hear three short beeps, you cannot make a change because something has not been set up (for example, a Fax Forwarding number has not been registered). You can register your Fax Forwarding number by entering 4. After you register the number, Fax Forwarding will work. Enter the fax number of a remote fax machine to receive stored fax messages. If you hear one long beep, fax messages have been erased from memory. Check whether your machine has received any faxes. If yes, you will hear one long beep. If not, you will hear three short beeps. One long beep means the change has been accepted. Press 9 0 to stop remote retrieval. Wait for the long beep, then hang up. Related Information • Remote Fax Retrieval Related Topics: • Change the Fax Forwarding Number • Store Incoming Faxes in the Machine's Memory • Forward Faxes Remotely • Choose the Correct Receive Mode 254