Brother International PT-P700 Master Command Reference - Page 27
Printing Command Details, NULL Invalidate, Description, ESC @ Initialize
View all Brother International PT-P700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Raster Command Reference 4. Printing Command Details NULL Invalidate ASCII: NULL Hexadecimal: 00 Description Skipped If data transmission is to be stopped midway, send the "initialize" command after sending the "invalidate" command for the appropriate number of bytes to return to the receiving state, where the print buffer is cleared. ESC @ Initialize ASCII: ESC @ Hexadecimal: 1B 40 Description Initializes mode settings. Also used to cancel printing. ESC i S Status information request ASCII: ESC i S Hexadecimal: 1B 69 53 Description Send a request to the printer for status information. For details on the status, refer to the previous section. The size is fixed at 32 bytes. Note Before sending print data to the printer, this command should be sent once. Since error information is automatically sent by the printer during printing, do not send this command while printing. For details on transmission of the status, refer to "5. Flow Charts". - 23 - 4. Printing Command Details