Brother International PT-P700 Master Command Reference - Page 37
ESC i M Various mode settings, Parameters
View all Brother International PT-P700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
ESC i M Various mode settings ASCII: ESC i M {n1} Hexadecimal: 1B 69 4D {n1} Parameters Definitions of {n1} The meaning of each bit in a 1-byte parameter is described below. 0 ~ 5bit:Not used 6bit:Auto cut 1. Automatically cuts 0. Does not automatically cut 7bit:Mirror printing 1. Mirror printing 0. No mirror printing Raster Command Reference ESC i K Advanced mode settings ASCII: ESC i K {n1} Hexadecimal: 1B 69 4B {n1} Parameters Definitions of {n1} The meaning of each bit in a 1-byte parameter is described below. 0 ~ 2bit:Not used 3bit:No chain printing When printing multiple copies, the labels are fed after the last one is printed. 1.No chain printing(Feeding and cutting are performed after the last one is printed.) 0:Chain printing(Feeding and cutting are not performed after the last one is printed.) 4bit:Special tape (no cutting) Labels are not cut when special tape is installed. 1.Special tape (no cutting) ON 0:Special tape (no cutting) OFF 5 ~ 6bit:Not used 7bit:No buffer clearing when printing The expansion buffer of the machine is not cleared with the "no buffer clearing when printing" command. If this command is sent when the data of the first label is printed (it is specified between the "initialize" command and the print data), printing is possible only if a print command is sent with the second or later label. 1.No buffer clearing when printing ON 0.No buffer clearing when printing OFF - 33 - 4. Printing Command Details