Home » Brother International Manuals » Label Makers » Brother International PT-P700 » Manual Viewer

Brother International PT-P700 Master Command Reference - Page 7

Printing Using Raster Commands, Flow Charts, Printing Command Details - not printing

View all Brother International PT-P700 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Raster Command Reference 1. Printing Using Raster Commands The printing procedure is described below. For detailed flow charts, refer to "5. Flow Charts". For details on each command, refer to "4. Printing Command Details". (1) Open the port Port (2) Send the status (Confirm the printer status (3) Send the print data At your side Computer, mobile terminal, etc. (5) Send the status (Confirm that printing is completed.) Your printer (6) Close the port (4) Print - 3 1. Printing Using Raster Commands

Section	Page
Introduction	5
About Raster Commands	6
1. Printing Using Raster Commands	7
2. Print Data	9
2.1 Print data overview	9
2.2 Sample (analyzing the print data of the test page)	11
2.2.1 Preparation	11
2.2.2 Checking the print data	11
2.2.3 Explanation of print data for the test page	14
2.3 Page data details	17
2.3.1 Resolution	17
2.3.2 Page size	18
2.3.3 Feed amount	21
2.3.4 Maximum and minimum lengths	22
2.3.5 Raster line	23
3. Print Command List	26
4. Printing Command Details	27
NULL Invalidate	27
Description	27
ESC @ Initialize	27
Description	27
ESC i S Status information request	27
Description	27
ESC i a Switch dynamic command mode	35
Parameters	35
Description	35
ESC i z Print information command	36
Description	36
ESC i M Various mode settings	37
Parameters	37
ESC i K Advanced mode settings	37
Parameters	37
ESC i d Specify margin amount (feed amount)	38
Description	38
M Select compression mode	39
Parameters	39
Description	39
[TIFF(Pack Bits)]	39
Example	39
Explanation of “TIFF compression mode”	40
g Raster graphics transfer	41
Description	41
Parameters	41
Z Zero raster graphics	41
Description	41
FF Print command	41
Description	41
Control-Z Print command with feeding	42
Description	42
5. Flow Charts	43
5.1 Concurrent printing normal flow for USB connection	44
5.2 Concurrent printing error flow for USB connection (when feeding at the end of the page)	45
5.3 Concurrent printing error flow for USB connection (with a concurrent printing error such as end of tape)	46
5.6 Buffered printing normal flow for USB connection	47
5.7 Buffered printing error flow for USB connection	48
5.8 Buffered printing cooling flow for USB connection	49
Appendix A: USB Specifications	50