Brother International PT-P700 Master Command Reference - Page 9
Print Data, 2.1 Print data overview, Sequence, Command Name, Description/Example
View all Brother International PT-P700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Raster Command Reference 2. Print Data 2.1 Print data overview The print data is constructed of the following: (1) initialization commands, (2) control codes, (3) raster data, and (4) print commands. If the print job consists of multiple pages, (2) through (4) are repeated. (1) Initialization commands Specified only once at the beginning of the job. Sequence Command Name Description/Example 1 Invalidate Sends a 100-byte invalidate command, and then resets the printer to the receiving state. 2 Initialize Initializes for printing. 1Bh, 40h (Fixed) (2) Control codes Added at the beginning of each page and sent for each page. Sequence Command Name Description/Example 1 Switch dynamic command mode Switches the printer to raster mode. 1Bh, 69h, 61h, 01h Sets the print information for the printer. 2 Print information command When printing 100 mm on 24-mm-wide tape with the 180 dpi model: 1Bh, 69h, 7Ah, 84h, 00h, 18h, 00h, 9Ch, 02h, 00h, 00h, 00h, 00h 3 Various mode settings When auto cut is enabled: 1Bh, 69h, 4Dh, 40h 4 Advanced mode settings When chain printing is disabled: 1BH,69H,4B,08H 5 Specify margin amount Specifies the amount of the margins. For 2 mm margins on the 180 dpi model: 1Bh, 69h, 64h, 0Eh, 00h 6 Select compression mode Selects the compression mode for raster graphics. To send the data compressed to TIFF format: 4Dh, 02h - 5 2. Print Data