Brother International PT-P700 Master Command Reference - Page 28
Number, Offset, Value/Reference, Raster Command Reference
View all Brother International PT-P700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Raster Command Reference Number Offset 1 0 2 1 3 2 4 3 Size 1 1 1 1 Name Print head mark Size Brother code Series code 5 4 1 Model code 6 5 1 Country code 7 6 1 Reserved 8 7 1 Reserved 9 8 1 Error information 1 10 9 1 Error information 2 11 10 1 Media width 12 11 1 Media type 13 12 1 Number of colors 14 13 1 Fonts 15 14 1 Japanese fonts 16 15 1 Mode 17 16 1 Density 18 17 1 Media length 19 18 1 Status type 20 19 1 Phase type 21 20 1 Phase number (higher order bytes) 22 21 1 Phase number (lower order bytes) 23 22 1 Notification number 24 23 1 Expansion area (number of bytes) 25 24 1 Tape color information 26 25 1 Text color information 27 26 4 Hardware settings Value/Reference Fixed at 80h Fixed at 20h Fixed at "B" (42h) Fixed at "0" (30h) PT-H500: Fixed at "d" (64h) PT-E500: Fixed at "e" (65h) PT-P700: Fixed at "g" (67h) Fixed at "0" (30h) Fixed at "00h" Fixed at 00h Refer to table (1) below. Refer to table (2) below. Refer to table (3) below. Refer to table (4) below. Fixed at 00h Fixed at 00h Fixed at 00h Value specified where the "various mode settings" command 00h if not specified Fixed at 00h Refer to table (3) below. Refer to table (5) below. Refer to table (6) below. Refer to table (7) below. Fixed at 00h Refer to table (8) below. Refer to table (9) below. Sets the default hardware information to be used for checking - 24 - 4. Printing Command Details