Brother International QL-1110NWB Raster Command Reference - Page 14
Step 3: Open the print data in the binary file editor.
View all Brother International QL-1110NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Raster Command Reference When the test page is printed with the printer, a dialog box appears so that the file name can be specified. (Refer to the illustration below.) After a file name is typed in and the [OK] button is clicked, the printer driver creates the print data and saves it in a file with the specified name. Dialog box for specifying the file name Step 3: Open the print data in the binary file editor. Open the saved file in the binary file editor. The rows of numbers that appear are the print data. (Refer to the illustration below.) The print data is constructed of the following: (1) initialization commands, (2) control codes, (3) raster data and (4) print commands, which were described in "2.1 Print data overview". For details on the print data, refer to "2.2.3 Explanation of print data for the test page". Print data - 10 - 2. Print Data