Brother International QL-1110NWB Raster Command Reference - Page 20

Raster Command Reference 62 mm x 29 mm 274 2.4" x 1.1" 62 mm x 100 mm 275 2.4" x 3.9" 102 mm x 51 mm 365 4.0" x 2.0" 102 mm x 152 mm 366 4.0" x 6.0" 385※ 103 mm x 164 mm 4.07" x 6.4" 12 mm Dia 362 0.47" Dia 24 mm Dia 363 0.94" Dia 58 mm Dia 273 2.2" Dia 62.0 mm 732 dots 62.0 mm 732 dots 101.6 mm 1200 dots 101.6 mm 1200 dots 103.6 mm 1224 dots 12.0 mm 142 dots 24.0 mm 284 dots 58.3 mm 688 dots 28.9 mm 341 dots 99.8 mm 1179 dots 50.5 mm 596 dots 152.8 mm 1804 dots 164.3 mm 1941 dots 12.0 mm 142 dots 24.0 mm 284 dots 58.3 mm 688 dots 58.9 mm 696 dots 58.9 mm 696 dots 98.6 mm 1164 dots 98.6 mm 1164 dots 101.6 mm 1200 dots 8.0 mm 94 dots 20.0 mm 236 dots 52.3 mm 618 dots 22.9 mm 271 dots 1.5 mm 18 dots 93.9 mm 1109 dots 1.5 mm 18 dots 44.5 mm 526 dots 1.5 mm 18 dots 140.6 mm 1660 dots 1.5 mm 18 dots 154.26 mm 1.0 mm 1822 dots 12 dots 8.0 mm 94 dots 2.0 mm 24 dots 20.0 mm 236 dots 2.0 mm 24 dots 52.3 mm 618 dots 3.0 mm 35 dots 3.0 mm 35 dots 3.0 mm 35 dots 3.05 mm 36 dots 6.1 mm 72 dots 5.0 mm 59 dots 2.0 mm 24 dots 2.0 mm 24 dots 3.0 mm 35 dots ID 7 8 9 10 19.64 mm 273 201 dots 53.9 mm 636 dots 14.0 mm 165 dots 47.9 mm 566 dots ※ The QL-1115NWB does not support this label size. * Margins of 3 mm (1.5 mm × 2) horizontally and 3 mm (1.5 mm × 2) vertically are added to a diameter of 16 mm. 2.3.3 Feed amount The feed amount (left and right margins) is defined below. Type Minimum Margin Setting Maximum Margin Setting Continuous length tape 3 mm 0.12" 35 dots 127 mm 5" 1500 dots Die-cut labels The length offset indicated in "(b) Die-cut labels" of "2.3.2 Page size" is used. However, set "0" as the value of the "specify margin amount" command. - 16 - 2. Print Data