Brother International QL-1110NWB Raster Command Reference - Page 9

Raster Command Reference 2. Print Data 2.1 Print data overview The print data is constructed of the following: (1) initialization commands, (2) control codes, (3) raster data, and (4) print commands. If the print job consists of multiple pages, (2) through (4) are repeated. (1) Initialization commands Specified only once at the beginning of the job. Sequence Command Name Description/Example 1 Invalidate Sends a 350-byte invalidate command, and then resets the printer to the receiving state. 2 Initialize Initializes for printing. 1Bh, 40h (Fixed) (2) Control codes Added at the beginning of each page and sent for each page. Sequence Command Name Description/Example 1 Switch dynamic command mode Switches to raster mode. 1Bh, 69h, 61h, 01h Switch automatic Dynamically switches whether an automatic status notification is 2 status notification given during printing. mode 1Bh, 69h, 21h, 00h 3 Print information command Sets the print information for the printer. For "4.07" × 6.4" (103 mm × 164 mm)" die-cut labels: 1Bh, 69h, 7Ah, 8Eh, 0Bh, 68h, A4h, 1Eh, 07h, 00h, 00h, 00h, 00h 4 Various mode To select "Auto Cut" 1Bh, 69h, 4Dh, 40h 5 Specify the page When an auto cut setting is effective, specify the number of sheets number in "cut each for auto cut. * labels" For each sheets, 1Bh, 69h, 41h, 01h 6 Expanded mode To select "Cut at End" flag 1Bh, 69h, 4Bh, 08h 7 Specify margin amount Specifies the amount of the margins. For 3 mm margins: 1Bh, 69h , 64h, 23h, 00h - 5 2. Print Data