Brother International QL-1110NWB Raster Command Reference - Page 37

ESC i z, Print information command

Get Brother International QL-1110NWB PDF manuals and user guides View all Brother International QL-1110NWB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Raster Command Reference ESC i z Print information command ASCII: ESC i z {n1} {n2} {n3} {n4} {n5} {n6} {n7} {n8} {n9} {n10} Hexadecimal: 1B 69 7A {n1} {n2} {n3} {n4} {n5} {n6} {n7} {n8} {n9} {n10} Description  Specifies the print information.  Definitions of {n1} through {n10} {n1}: Valid flag; Specifies which values are valid 0x02: Media type 0x04: Media width 0x08: Media length 0x40: Priority given to print quality 0x80: Printer recovery always on {n2}: Media type Continuous length tape: 0Ah Die-cut labels: 0Bh {n3}: {n4}: {n3}: Media width (mm) {n4}: Media length (mm) For the media of width 62 mm × length 100 mm, specify as n3=3Eh and n4=64h. {n5-n8}: Raster number = n8*256*256*256 + n7*256*256 + n6*256 + n5 If the media is not correctly loaded into the printer when the media type, media width and media length of valid flag {n1} are set to "ON", an error status is returned. (Bit 0 of "(2) Error information 2" is set to "ON".) {n9}: Starting page: 0 Other pages: 1 {n10}: Fixed at 0 - 33 - 4. Printing Command Details

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Raster Command Reference
- 33 -
4.
Printing Command Details
ESC i z
Print information command
ASCII:
ESC
i
z
{n1}
{n2}
{n3} {n4} {n5}
{n6}
{n7}
{n8}
{n9}
{n10}
Hexadecimal: 1B
69
7A
{n1}
{n2}
{n3} {n4} {n5}
{n6}
{n7}
{n8}
{n9}
{n10}
Description
Specifies the print information.
Definitions of {n1} through {n10}
{n1}:
Valid flag; Specifies which values are valid
0x02: Media type
0x04: Media width
0x08: Media length
0x40: Priority given to print quality
0x80: Printer recovery always on
{n2}:
Media type
Continuous length tape: 0Ah
Die-cut labels: 0Bh
{n3}:
{n3}: Media width (mm)
{n4}: Media length (mm)
For the media of width 62 mm × length 100 mm, specify as n3=3Eh and n4=64h.
{n4}:
{n5-n8}:
Raster number = n8*256*256*256 + n7*256*256 + n6*256 + n5
If the media is not correctly loaded into the printer when the media type, media width and
media length of valid flag {n1} are set to “ON”, an error status is returned.
(Bit 0 of
“
(2)
Error information 2
”
is set to “ON”.)
{n9}:
Starting page: 0
Other pages: 1
{n10}:
Fixed at 0