Brother International QL-1110NWB Raster Command Reference - Page 35

ESC i, Switch automatic status notification mode, Raster graphics transfer, Zero raster graphics

Get Brother International QL-1110NWB PDF manuals and user guides View all Brother International QL-1110NWB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Raster Command Reference ESC i ! Switch automatic status notification mode ASCII: ESC i ! {n1} Hexadecimal: 1B 69 21 {n1} Parameters Definitions of {n1} 0：Notify. (default) 1：Do not notify. Description  Dynamically switches whether the automatic status notification is given during printing. A printer that receives this command operates in the specified command mode until the printer is turned off.  Use this command when building a system where the status is not obtained using a status information request. g Raster graphics transfer ASCII: g Hexadecimal: 67 {s} {n} {d1} ... {dn} {s} {n} {d1} ... {dn} Parameters {s} 00h {n} Number of bytes of raster data (d1 to dh) However, use the following value if no compression is specified as the compression mode. n=162 {d1~dn} Raster data. Z Zero raster graphics ASCII: Z Hexadecimal: 5A Description  Fills raster line with 0 data. * The QL-800 does not support this command. - 31 - 4. Printing Command Details

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Raster Command Reference
- 31 -
4.
Printing Command Details
ESC i !
Switch automatic status notification mode
ASCII:
ESC
i
!
{n1}
Hexadecimal: 1B
69
21
{n1}
Parameters
Definitions of {n1}
0
：
Notify. (default)
1
：
Do not notify.
Description
Dynamically switches whether the automatic status notification is given during printing. A printer that
receives this command operates in the specified command mode until the printer is turned off.
Use this command when building a system where the status is not obtained using a status information
request.
g
Raster graphics transfer
ASCII:
g
{s}
{n}
{d1}
...
{dn}
Hexadecimal: 67
{s}
{n}
{d1}
...
{dn}
Parameters
{s} 00h
{n}
Number of bytes of raster data (d1 to dh)
However, use the following value if no compression is specified as the compression mode.
n=162
{d1~dn} Raster data.
Z
Zero raster graphics
ASCII:
Z
Hexadecimal: 5A
Description
Fills raster line with 0 data.
* The QL-800 does not support this command.