Brother International QL-1110NWB Raster Command Reference - Page 16
Command Name, Description
View all Brother International QL-1110NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Raster Command Reference Descriptions for the numbers in the print data on the previous page are provided in the following table. For details on each command, refer to "4. Printing Command Details". No. Command Name Description 1 Invalidate A invalidate command is sent. 2 Initialize The "initialize" command is sent. 3 Switch dynamic command mode The printer is switched to raster mode. Send this command before sending raster data to the printer. Switch automatic 4 status notification mode Dynamically switches whether an automatic status notification is given during printing. 5 Job ID setting commands Internal specification commands Since this is a command for outputting with the commercial version driver, it is unnecessary for the user to send this command. 6 Print information command Media size information for the print data is sent. This is the command for "4.07" × 6.4" (103 mm × 164 mm)" die-cut labels. 7 Various mode (1Bh+69h+4Dh+00H) This is the command for specifying settings such as cut options. Here, "auto cut" is specified. 8 Specify the page number in "cut each * labels" The number of pages printed before automatically cutting is specified. 9 Expanded mode This is the command for specifying expanded functions. Here, "cut at end" is specified. 10 Specify margin amount Since a margin amount cannot be specified with die-cut labels, this command is sent with a margin amount of 0. 11 Select compression mode TIFF compression mode is selected. 12 Raster data Raster data continues. 13 Print command with feeding Since one page will be printed, this is sent at the end of the first page. - 12 - 2. Print Data