Brother International Simplicity SB3129 Users Manual - English
Brother International Simplicity SB3129 Manual
View all Brother International Simplicity SB3129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Simplicity SB3129 manual content summary:
- Brother International Simplicity SB3129 | Users Manual - English - Page 1
Read before use. GETTING READY SEWING BASICS Read when additional information is required. UTILITY STITCHES APPENDIX Sewing Machine Product Code: 885-S61 Operation Manual - Brother International Simplicity SB3129 | Users Manual - English - Page 2
) ● Foot controller: Model N5V This foot controller can be used on this machine model SB3129. ● The screw of the presser foot holder is available through your authorized dealer. (Part code: XA4813-051) ● The organized accessory tray is available,through your authorized dealer. (Part code: XC4489-051 - Brother International Simplicity SB3129 | Users Manual - English - Page 3
buttons Use the operation buttons to start the sewing machine and automatically cut the thread. (page Cover D) 0 Flat bed attachment with accessory compartment Store presser feet and bobbins in the accessory compartment of the flat bed attachment. When sewing cylindrical pieces, remove the flat bed - Brother International Simplicity SB3129 | Users Manual - English - Page 4
thread hook. 4 Needle plate The needle plate is marked with guides for sewing straight seams. 5 Bobbin cover/shuttle Remove the bobbin cover, sewing machine by its handle when transporting the machine. 3 Balance wheel Turn the balance wheel toward you to raise and lower the needle to sew one stitch - Brother International Simplicity SB3129 | Users Manual - English - Page 5
sewing machine is being operated. Green: When the machine is ready to start sewing or while it is sewing Red: When the machine is not ready to start sewing Orange: When the bobbin winder shaft is moved to the right for winding the bobbin thread onto the bobbin 2 Reverse/reinforcement stitch - Brother International Simplicity SB3129 | Users Manual - English - Page 6
on the front at the right of the sewing machine, consists of the LCD (liquid crystal display) and keys for specifying various sewing settings. 1 4 5 2 6 3 7 8 9 0 1 LCD (liquid crystal display) Settings for the selected stitch and error messages for incorrect operations appear in the - Brother International Simplicity SB3129 | Users Manual - English - Page 7
optional accessories to be purchased separately. 1. 2. 3. 4. 5. 6. 7. No. Part Name 1 Side cutter 2 Quilting guide 3 Wide table 4 Stitch guide foot (XE1094-101) Memo ● To obtain optional accessories or parts, contact your sales representative or the nearest authorized service center. 1 - Brother International Simplicity SB3129 | Users Manual - English - Page 8
Thank you for purchasing this sewing machine. Before using this sewing machine, carefully read the "IMPORTANT SAFETY INSTRUCTIONS" (page 6), and then study this manual for the correct operation of the various functions. In addition, after you have finished reading this manual, store it where - Brother International Simplicity SB3129 | Users Manual - English - Page 9
Accessories ...1 Introduction ...2 Sewing Machine Features ...2 IMPORTANT SAFETY INSTRUCTIONS 6 GETTING READY 9 Turning the Machine needle ...27 Threading the needle manually (without using the needle Sewing Cylindrical or Large Pieces 42 Stitching cylindrical pieces ...42 Sewing large pieces of fabric - Brother International Simplicity SB3129 | Users Manual - English - Page 10
allowance ...64 UTILITY STITCHES 67 Selecting Stitching ...68 Stitch types ...68 Selecting stitching ...68 Overcasting Stitches ...70 Sewing overcasting stitches using overcasting foot "G 70 Sewing overcasting stitches using zigzag foot "J 71 Sewing overcasting stitches using the optional side - Brother International Simplicity SB3129 | Users Manual - English - Page 11
...124 Design exampled ...126 APPENDIX ...127 Stitch Settings ...128 Utility stitches ...128 Other stitches ...133 Maintenance ...135 Restrictions on oiling ...135 Cleaning the machine surface ...135 Cleaning the shuttle race ...135 Troubleshooting ...137 Error messages ...141 Nothing appears in - Brother International Simplicity SB3129 | Users Manual - English - Page 12
Please read these safety instructions before attempting to use the machine. DANGER - To reduce the risk of electric shock: 1 Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any user servicing adjustments mentioned in this manual, or if you are - Brother International Simplicity SB3129 | Users Manual - English - Page 13
sewing, and follow careful instruction when freehand stitching so that you do not deflect the needle and cause it to break. 7 This machine is not a toy: • Your close attention is necessary when the machine case and machine, and should never be used. • Always consult the operation manual when - Brother International Simplicity SB3129 | Users Manual - English - Page 14
first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in this manual. Use accessories recommended by - Brother International Simplicity SB3129 | Users Manual - English - Page 15
1 GETTING READY The various preparations required before starting to sew are described in this chapter. Turning the Machine On/Off 10 Understanding the LCD Screens 12 Changing the Machine Settings 14 Winding/Installing the Bobbin 18 Upper Threading ...24 Replacing the Needle 33 Replacing the - Brother International Simplicity SB3129 | Users Manual - English - Page 16
On/Off This section explains how to turn the sewing machine on and off. Power supply precautions Be sure to . ● Do not touch the plug with wet hands. Electric shock may result. ● When unplugging the machine, always turn off the main power first. Always grasp the plug to remove it from the outlet. - Brother International Simplicity SB3129 | Users Manual - English - Page 17
dogs will make sound when they move; this is not a malfunction. Note ● When the sewing machine is turned off, all stitch settings are cancelled. ● If a power outage occurs while the sewing machine is being operated, turn off the sewing machine and unplug the power supply cord. When restarting the - Brother International Simplicity SB3129 | Users Manual - English - Page 18
Understanding the LCD Screens The LCD screen, located on the front at the right of the sewing machine, displays the settings for the selected stitch and error messages if operations are performed incorrectly. When the sewing machine is turned on, the LCD comes on and the following screen appears - Brother International Simplicity SB3129 | Users Manual - English - Page 19
you are finished with the help screen, Turn on the sewing machine. 6 press (OK key). 1 X The initial stitch screen appears again. X The LCD comes on. Press (sewing machine help key) in the 2 operation panel. X The sewing machine help screen appears. Press , , and (arrow keys) until 3 the - Brother International Simplicity SB3129 | Users Manual - English - Page 20
settings can be changed. Changing the settings The general procedure for changing machine settings is described below. Press (OK key). 6 X The initial stitch screen appears again. Turn on the sewing machine. 1 X The LCD comes on. Press 2 panel. (settings key) in the operation X The settings - Brother International Simplicity SB3129 | Users Manual - English - Page 21
Needle position Specifies where the needle is positioned when the sewing machine is stopped. page 16 Twin needle sewing Specifies the twin needle. page 28 Stitch width control Allows the stitch width to be adjusted with the sewing speed controller. page 98 Language Allows the language used - Brother International Simplicity SB3129 | Users Manual - English - Page 22
sewing machine is purchased, it is set to leave the needle lowered in the fabric when sewing is stopped. However, the machine can be set to instead leave the needle raised when sewing The machine is now set to stop with the needle in the raised position. Press (OK key). 4 X The initial stitch - Brother International Simplicity SB3129 | Users Manual - English - Page 23
are displayed can be changed to one of the many available. When 1 the sewing machine is purchased, the screens appear in English. Press (settings key) in the operation 1 the screens is changed. Press (OK key). 4 X The initial stitch screen appears again. Changing the Machine Settings 17 - Brother International Simplicity SB3129 | Users Manual - English - Page 24
. Use of any other bobbin may result in injuries or damage to the machine. ● The enclosed bobbin was designed specifically for this sewing machine. If bobbins from older models are used, the machine will not operate correctly. Use only the enclosed bobbin or bobbins of the same type (part code - Brother International Simplicity SB3129 | Users Manual - English - Page 25
that is slightly larger than the diameter of the spool. The medium-sized spool cap is already on the spool pin when the sewing machine is purchased. 1 2 Remove the spool cap that is inserted onto the 5 spool pin. 1 2 1 Spool pin 2 Spool cap 3 1 Spool cap (large) 2 Spool cap (medium) 3 Spool - Brother International Simplicity SB3129 | Users Manual - English - Page 26
on the slit in the spool or the needle may break. Pull the thread to the right, pass it under the 0 hook on the thread guide for bobbin winding, and then wind it counterclockwise between the discs. 1 1 While holding the spool with your right hand, 8 pull the thread with your left - Brother International Simplicity SB3129 | Users Manual - English - Page 27
e (start/stop button) once. When the foot controller is plugged in, remove your foot from the foot controller. X The sewing machine stops. Slide the sewing speed controller back to its i original position. CAUTION ● Use a bobbin thread that has been correctly wound, otherwise the needle may - Brother International Simplicity SB3129 | Users Manual - English - Page 28
the tab with your left hand as shown, lightly pull the thread to guide it through the slit. Memo ● The order that the bobbin thread should twice to raise the needle, and then raise the presser foot lever. Turn off the sewing machine. 2 Slide the bobbin cover latch to the right. 3 1 2 1 1 Tab - Brother International Simplicity SB3129 | Users Manual - English - Page 29
down the bobbin with 7 your right hand as shown, guide the thread through the slit (1 and 2). • At this the next page). Memo ● You can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread before starting to sew, pull up the thread according to the procedure - Brother International Simplicity SB3129 | Users Manual - English - Page 30
threading the upper thread, carefully follow the instructions. If the upper threading is not correct, the thread may become tangled or the needle may bend or break. Threading the upper thread Turn on the sewing machine. 1 Memo ● The order that the machine should be threaded is indicated by a solid - Brother International Simplicity SB3129 | Users Manual - English - Page 31
that is slightly larger than the diameter of the spool. The medium-sized spool cap is already on the spool pin when the sewing machine is purchased. 1 2 Remove the spool cap that is inserted onto the 5 spool pin. 1 2 1 Spool pin 2 Spool cap 3 1 Spool cap (large) 2 Spool cap (medium) 3 Spool - Brother International Simplicity SB3129 | Users Manual - English - Page 32
cannot be threaded. Be sure to raise the presser foot so that the shutter is open in order to thread the machine. 1 1 Thread guide cover Pass the thread under the thread guide plate 9 from the right. 1 1 Shutter Pass the thread through the thread hook at the a base of the needle bar. 1 Thread - Brother International Simplicity SB3129 | Users Manual - English - Page 33
sewing machine needles 75/11 through 100/16. ● The needle threader cannot be used with the wing needle or the twin needle. ● If the needle threader cannot be used, refer to "Threading the needle manually guide 2 Thread guide disk Cut the thread with the cutter on the left side 2 of the machine. - Brother International Simplicity SB3129 | Users Manual - English - Page 34
(at the right). Threading the needle manually (without using the needle threader) When needle as described below. Thread the machine to the needle bar thread 1 guide. • For details, refer to machine. Using the twin needle With the twin needle, you can sew two parallel lines of the same stitch - Brother International Simplicity SB3129 | Users Manual - English - Page 35
If the needle threader is used with the twin needle, the sewing machine may be damaged. Insert the extra spool pin onto the bobbin guide cover • For details, refer to step 8 through 0 of "Threading the upper thread" (page 26). Without passing the thread through the 8 needle bar thread hook, manually - Brother International Simplicity SB3129 | Users Manual - English - Page 36
to each other. X The twin needle can now be used. Press (OK key). e X The initial stitch screen appears again, and appears in the lower-left corner of the screen. • Even after the sewing machine is turned off, the twin needle setting is not cancelled. CAUTION ● When using the twin needle, be - Brother International Simplicity SB3129 | Users Manual - English - Page 37
Using thread that winds off Pulling up the bobbin thread quickly When making gathers or before free-motion quilting, When using thread that winds off quickly, such as first pull up the bobbin thread as described below. transparent nylon thread or metallic thread, place the enclosed spool net - Brother International Simplicity SB3129 | Users Manual - English - Page 38
GETTING READY Pull out about 5 cm (2 inches) of the bobbin 5 thread under the presser foot toward the rear of the machine. Reattach the bobbin cover. 6 Insert the tab in the lower-left corner of the bobbin cover, and then lightly press down on the right side. 2 1 32 - Brother International Simplicity SB3129 | Users Manual - English - Page 39
breaks and fragments are dispersed. Be sure to read and carefully follow the instructions below. CAUTION ● Only use home sewing machine needles. Use of any other needle may bend the needle or damage the machine. ● Never use bent needles. Bent needles can easily break, possibly resulting in injuries - Brother International Simplicity SB3129 | Users Manual - English - Page 40
fabrics or fabrics where skipped stitches easily occur. ● Use a 90/14 to 100/16 needle with transparent nylon threads, regardless of the fabric being sewn. Checking the needle Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated. Before - Brother International Simplicity SB3129 | Users Manual - English - Page 41
a needle that has been determined to be straight according to the instructions in "Checking the needle". Press (needle position button) once or 1 twice to raise the needle. 1 1 Needle position button Turn off the sewing machine. 2 CAUTION ● Before replacing the needle, be sure to turn off the - Brother International Simplicity SB3129 | Users Manual - English - Page 42
GETTING READY CAUTION ● Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the needle may break or damage may result. 36 - Brother International Simplicity SB3129 | Users Manual - English - Page 43
. CAUTION ● Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break. ● Only use presser feet designed specifically for this sewing machine. Use of any other presser foot may result in injuries or - Brother International Simplicity SB3129 | Users Manual - English - Page 44
screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Buttonhole foot "A" Overcasting foot "G" Zigzag foot "J" Button fitting foot - Brother International Simplicity SB3129 | Users Manual - English - Page 45
37). 1 1 Presser foot lever Use the screwdriver to loosen the presser foot 2 holder screw. Turn the presser foot dial at the back of the 2 sewing machine. The scale on the dial indicates the range from 1 (weak) to 4 (strong). Turn the dial to the right (smaller number) to decrease the pressure - Brother International Simplicity SB3129 | Users Manual - English - Page 46
. ■ Attaching the walking foot Note ● Thread the needle manually when using the walking foot, or only attach the walking foot after threading 2 1 1 Needle position button X The needle is raised. Turn off the sewing machine. 2 1 Connecting fork 2 Needle clamp screw Lower the presser foot lever, insert - Brother International Simplicity SB3129 | Users Manual - English - Page 47
holder. 5 • For details, refer to "Removing the presser foot holder" (page 39). Memo ● Only the straight stitch (with reinforcement stitching) and the zigzag stitch can be used with the walking foot. For details on the stitches, refer to "Stitch Settings" (page 128). Replacing the Presser Foot 41 - Brother International Simplicity SB3129 | Users Manual - English - Page 48
large pieces of fabric, remove the flat bed attachment. Stitching cylindrical pieces Removing the flat bed attachment makes it easier to sew cylindrical pieces such as cuffs and pant legs. Pull the flat bed attachment off to the left. 1 Sewing large pieces of fabric The optional wide table makes - Brother International Simplicity SB3129 | Users Manual - English - Page 49
Turn the screw at the bottom of the legs to 4 adjust their height. 1 CAUTION ● Do not move the sewing machine while the wide table is attached, otherwise damage or injuries may occur. When you are finished using the wide table, 5 remove it. While slightly lifting - Brother International Simplicity SB3129 | Users Manual - English - Page 50
GETTING READY 44 - Brother International Simplicity SB3129 | Users Manual - English - Page 51
2 SEWING BASICS The necessary preparations for sewing are described in this chapter. Sewing...46 Adjusting the Thread Tension 54 Adjusting the Stitch Width and Length 55 Useful Functions ...57 Useful Sewing Tips 62 - Brother International Simplicity SB3129 | Users Manual - English - Page 52
operations are described below. Before operating the sewing machine, read the following precautions. CAUTION ● While the machine is in operation, pay special attention to the needle location. In addition, keep your hands away from all moving parts such as the needle and - Brother International Simplicity SB3129 | Users Manual - English - Page 53
procedure Follow the basic procedures below to sew. 1 Turn on the machine. Turn on the sewing machine. For details on turning on the machine, refer to "Turning on the machine" (page 11). ↓ 2 Select the stitch. Select the stitch appropriate for the area to be sewn. For details on selecting - Brother International Simplicity SB3129 | Users Manual - English - Page 54
in the correct order and that the right and wrong sides of the fabric are aligned correctly. Turn on the sewing machine. 1 Lower the presser foot lever. 5 The straight stitch (left needle position) is automatically selected. Press 2 (needle position button) once or twice to raise the needle - Brother International Simplicity SB3129 | Users Manual - English - Page 55
Starting to sew When the end of the stitching is reached, 3 press (start/stop button) once. Once you are ready to start sewing, you can start the sewing machine. The sewing speed can be adjusted X The machine stops sewing with the needle down (in the fabric). using either the operation buttons - Brother International Simplicity SB3129 | Users Manual - English - Page 56
may occur. Faster • Slowly press down on the foot controller. Pressing it down hard starts sewing too quickly. X The machine starts sewing. When the end of the stitching is reached, 6 completely release the foot controller. X The machine stops sewing with the needle lowered (in the fabric). 50 - Brother International Simplicity SB3129 | Users Manual - English - Page 57
X The machine starts sewing. 1 Reverse/reinforcement stitch button X While the reverse/reinforcement stitch button is held pressed, reverse stitches are sewn. After sewing back to the beginning of the 4 stitching, release the reverse/reinforcement stitch button. X The machine stops sewing. Press - Brother International Simplicity SB3129 | Users Manual - English - Page 58
pressed, the machine sews at a low speed. X The machine starts sewing in the normal sewing direction. After sewing to the end of the stitching, the 9 sewing machine stops. Release the start/stop button or foot controller. 1 3 1 2 ■ Sewing reinforcement stitches When sewing stitches other than - Brother International Simplicity SB3129 | Users Manual - English - Page 59
■ Using the manual thread cutter When sewing with nylon or metallic threads, or other special threads, use the thread cutter on the 2 side of the machine to cut the threads. 1 1 Thread cutter button X The threads are cut and the needle is raised. When you wish to finish the stitching and the - Brother International Simplicity SB3129 | Users Manual - English - Page 60
SEWING BASICS Adjusting the Thread Tension The tensions of the upper thread and of setting. However, if the preset thread tension does not give the desired result or if you are sewing with special thread or on special fabric, use the thread tension dial under the upper cover to adjust the - Brother International Simplicity SB3129 | Users Manual - English - Page 61
length can be set, refer to "Stitch Settings" (page 128). Adjusting the stitch width The stitch width can be adjusted with the arrow keys. Turn on the sewing machine. 1 X The LCD comes on. Select a stitch. 2 X A screen containing settings for the selected stitch appears. • For details on selecting - Brother International Simplicity SB3129 | Users Manual - English - Page 62
adjusted with the arrow keys. Turn on the sewing machine. 1 X The LCD comes on. Select a stitch. 2 X A screen containing settings for the selected stitch appears. Memo ● To reset the stitch length to its standard setting, select the same stitch again or change the setting to the highlighted value - Brother International Simplicity SB3129 | Users Manual - English - Page 63
again, and appears in the lower-left corner of the screen. X The LCD comes on. Select a stitch. 2 • When the sewing machine is turned off, the automatic reverse/reinforcement stitching setting is cancelled. Position the fabric under the presser foot, and 8 then press (start/stop button) once - Brother International Simplicity SB3129 | Users Manual - English - Page 64
buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn. 1 1 Reverse/reinforcement stitch button X After reverse/reinforcement stitches are sewn, the sewing machine stops. Memo ● Reverse/reinforcement stitches will not be sewn if the start/stop button is pressed - Brother International Simplicity SB3129 | Users Manual - English - Page 65
screen appears again, and appears in the lower-left corner of the screen. X The LCD comes on. Select a stitch. 2 • When the sewing machine is turned off, the programmed thread-cutting setting is cancelled. Position the fabric under the presser foot, and 8 then press (start/stop button) once - Brother International Simplicity SB3129 | Users Manual - English - Page 66
BASICS X After reverse/reinforcement stitches are sewn, the sewing machine stops and cuts the thread. Saving stitch settings Adjusted stitch width and length settings can be saved so that they will be specified each time the stitch is selected. The various settings can be saved for each utility - Brother International Simplicity SB3129 | Users Manual - English - Page 67
• The next time that the stitch is selected, the saved settings are the first ones that are displayed. • To clear the saved settings and return the stitch width and length to their default settings, press so that , and then press (OK key). 2 Useful Functions 61 - Brother International Simplicity SB3129 | Users Manual - English - Page 68
that will be used with your project. Changing the sewing direction When the stitching reaches a corner, stop the 1 sewing machine. Leave the needle lowered (in the fabric). If the needle remained up when the machine stopped sewing, press (needle position button) to lower the needle. Raise - Brother International Simplicity SB3129 | Users Manual - English - Page 69
) thick is sewn or if the fabric is pushed with too much force, the needle may bend or break. 1 1 Sewing direction Raise the presser foot lever. 1 Align the beginning of stitching, and then 2 position the fabric. While holding zigzag foot "J" level, hold the 3 presser foot locking pin (black button - Brother International Simplicity SB3129 | Users Manual - English - Page 70
the needle plate. ■ Aligning the fabric with the presser foot Sew while keeping the right edge of the presser foot a fixed distance from the edge of the fabric. 1 2 1 Seam 2 Presser foot ■ Aligning the fabric with the optional stitch guide foot Sew while keeping the right edge of the fabric aligned - Brother International Simplicity SB3129 | Users Manual - English - Page 71
a needle plate marking The markings on the needle plate show the distance from the needle position of a seam sewn with the straight stitch (left needle position). Sew while keeping the edge of the fabric aligned with a marking in the needle plate. The distance between the markings in the upper scale - Brother International Simplicity SB3129 | Users Manual - English - Page 72
SEWING BASICS 66 - Brother International Simplicity SB3129 | Users Manual - English - Page 73
and their applications are described in this chapter. Selecting Stitching 68 Overcasting Stitches 70 Basic Stitching...74 Blind Hem Stitching 76 Buttonhole Stitching 78 Zipper Insertion ...85 Zipper/piping Insertion 89 Sewing Stretch Fabrics and Elastic Tape 91 Appliqué, Patchwork and Quilt - Brother International Simplicity SB3129 | Users Manual - English - Page 74
sewing machine is turned on, the straight stitch (left needle position) is selected. Determine the stitch that you wish to use. 1 • Refer to "Stitch types" (at the left). Determine which presser foot should be used 2 with the selected stitch. The presser feet are stored in the accessory compartment - Brother International Simplicity SB3129 | Users Manual - English - Page 75
that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Memo ● For details on adjusting the stitch width and length, refer to "Adjusting the - Brother International Simplicity SB3129 | Users Manual - English - Page 76
that is used. Sewing overcasting stitches using overcasting foot "G" Three stitches can be used to sew overcasting with overcasting foot "G". Stitch Name Pattern Stitch Key Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot 11 Preventing - Brother International Simplicity SB3129 | Users Manual - English - Page 77
using zigzag foot "J" Seven stitches can be used to sew overcasting stitches with zigzag foot "J". Stitch Name Pattern Stitch Key Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot Zigzag stitch (center 7 needle position) Preventing fraying - Brother International Simplicity SB3129 | Users Manual - English - Page 78
the presser foot" (page 37). Lower the presser foot lever, and then 2 manually thread the needle. • The needle threader cannot be used. If the needle threader is used with the side cutter, the sewing machine may be damaged. Raise the presser foot lever. 3 2 1 Connecting fork 2 Needle clamp - Brother International Simplicity SB3129 | Users Manual - English - Page 79
sewing machine. Position the fabric in the side cutter. 0 The cut in the fabric should be positioned over the guide plate of the side cutter. Select a stitch. 8 • For details, refer to "Selecting stitching" (page 68). CAUTION ● After adjusting the stitch brother retailer. Overcasting Stitches 73 - Brother International Simplicity SB3129 | Users Manual - English - Page 80
STITCHES Basic Stitching Straight stitches are used for sewing plain seams. Five stitches are available for basic stitching. Stitch Name Pattern Stitch Key Application Stitch Width [mm (inch.)] Auto Manual Basting 6 stitch - Temporarily securing 0.0 0.0-7.0 (0) (0-1/4) 1 Straight stitch - Brother International Simplicity SB3129 | Users Manual - English - Page 81
needle position to the right side of the presser foot is 12 mm 3 (1/2 inch). If the stitch width is changed (between 0 and 7 mm (1/4 inch)), the needle position will also change. By changing the stitch width and sewing with the right side of the presser foot aligned with the edge of the fabric - Brother International Simplicity SB3129 | Users Manual - English - Page 82
.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot 17 Blind hem stitch 18 Blind hem stitching on mediumweight fabrics 0.0 (0) 3← - 3→ 2.0 (1/16) 1.0-3.5 (1/16-1/8) R Blind hem stitching on stretch 0.0 fabrics (0) 3← - 3→ 2.0 (1/16) 1.0-3.5 (1/16-1/8) R Sew a blind - Brother International Simplicity SB3129 | Users Manual - English - Page 83
far to the left. Press (of the arrow keys) to decrease the stitch width so that the needle slightly catches the fold of the hem. Sew with the fold of the hem against the 7 presser foot guide. Remove the basting stitching. 8 1 2 1 2 1 Wrong side of fabric 2 Right side of fabric 1 Wrong side of - Brother International Simplicity SB3129 | Users Manual - English - Page 84
can be sewn and buttons can be sewn on. Eleven stitches are available for sewing on buttons and one-step buttonholes. Stitch Name Pattern Stitch Key Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot 42 Horizontal buttonholes on - thin and - Brother International Simplicity SB3129 | Users Manual - English - Page 85
1 2 5 3 4 A 1 Button guide plate 2 Presser foot scale 3 Pin 4 Marks on buttonhole foot 5 5 mm (3/16 inch) 1 Marks on fabric 2 Button hole sewing Pull out the button guide plate of buttonhole 2 foot "A", and then insert the button that will be put through the buttonhole. Buttonhole Stitching 79 - Brother International Simplicity SB3129 | Users Manual - English - Page 86
a diameter of 15 mm (9/16 inch) and a thickness of 10 mm (3/8 inch), the button guide plate should be set to 25 mm (1 inch) on the scale. 1 2 1 10 mm (3/8 sewing. A 2 1 Mark on fabric 2 Red marks on buttonhole foot 80 X Once sewing is completed, the machine automatically sews reinforcement stitches - Brother International Simplicity SB3129 | Users Manual - English - Page 87
1 • For details, refer to "Adjusting the stitch width" (page 55). Memo ● Before sewing buttonholes, check the stitch length and width by sewing a trial buttonhole on a scrap piece of fabric. ■ Sewing buttonholes on stretch fabrics When sewing buttonholes on stretch fabrics, use a gimp thread. Hook - Brother International Simplicity SB3129 | Users Manual - English - Page 88
. 3 Adjust the stitch width to the thickness of the 4 gimp thread. Lower the presser foot lever and the 5 buttonhole lever, and then start sewing. When sewing is finished, gently pull the gimp 6 thread to remove any slack. Button sewing Buttons can be sewn on with the sewing machine. Buttons with - Brother International Simplicity SB3129 | Users Manual - English - Page 89
the button so that the needle goes into the two holes toward the rear of the sewing machine, and then sew them in the same way. Start sewing. 6 X The sewing machine automatically stops after sewing reinforcement stitches. • If additional strength is needed to secure the button, perform the button - Brother International Simplicity SB3129 | Users Manual - English - Page 90
the shank lever toward you. 1 1 Shank lever After sewing is finished, cut the upper thread 2 with plenty of excess, wind it around the thread between the button and the fabric, and then tie it to the upper thread at the beginning of the stitching. Tie together the ends of the bobbin thread - Brother International Simplicity SB3129 | Users Manual - English - Page 91
A zipper can be sewn in place. Stitch Name Pattern Stitch Key Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot Straight stitch (center 3 needle position) Attaching zippers Sewing concealed seams and - pintucks - 2.5 0.2-5.0 I (3/32 - Brother International Simplicity SB3129 | Users Manual - English - Page 92
the needle hits the presser foot, the needle may bend or break. Topstitch around the zipper. 7 1 3 2 4 1 Stitching 2 Right side of fabric 3 Basting stitching 4 End of zipper opening CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break - Brother International Simplicity SB3129 | Users Manual - English - Page 93
zipper, stop the sewing machine with the needle lowered (in the fabric), raise the presser foot lever, and then open the zipper and continue sewing. 1 Pin on the right side 2 Needle drop point • For details, refer to "Replacing the presser foot" (page 37). Select stitch 3 . 7 • For details, refer - Brother International Simplicity SB3129 | Users Manual - English - Page 94
5 cm (2 inch) from the c end of the zipper, stop the sewing machine with the needle lowered (in the fabric), and then raise the presser foot lever. Remove the basting stitching, open the zipper, d and then continue sewing. 1 1 Basting stitching Attach the presser foot holder to the other pin a of - Brother International Simplicity SB3129 | Users Manual - English - Page 95
can be sewn in place. Stitch Name Pattern Stitch Key Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot Straight stitch (left 1 needle position) Attaching zippers Sewing concealed seams and piping 0.0 (0) 0.0-7.0 2.5 0.2-5.0 (0-1/4) (3/32 - Brother International Simplicity SB3129 | Users Manual - English - Page 96
to the steps of attaching the optional 2 adjustable zipper/piping foot on the previous page. Sew along the piping. 3 1 Stitching 2 Right side of fabric 3 Basting stitching 4 End of zipper opening CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend - Brother International Simplicity SB3129 | Users Manual - English - Page 97
Sewing Stretch Fabrics and Elastic Tape Stretch fabrics can be sewn and elastic tape can be attached. Stitch Name Pattern Stitch Key Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot Stretch 5 stitch Stretch fabrics 1.0 1.0-3.0 2.5 - Brother International Simplicity SB3129 | Users Manual - English - Page 98
UTILITY STITCHES Select a stitch. 3 • For details, refer to "Selecting stitching" (page 68). Sew the elastic tape to the fabric while 4 stretching the of the presser foot with your right hand. CAUTION ● When sewing, be sure that the needle does not touch any pins, otherwise the needle may bend or break. - Brother International Simplicity SB3129 | Users Manual - English - Page 99
and Quilt Stitching The stitches that can be used for sewing appliqués, patchwork and quilts are described below. Stitch Name Pattern Stitch Key Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot 7 Zigzag stitch 60 Attaching appliqu - Brother International Simplicity SB3129 | Users Manual - English - Page 100
optional open toe foot. 4 • For details, refer to "Replacing the presser foot" (page 37). Select a stitch. 5 • For details, refer to "Selecting stitching" (page 68). When sewing around corners, stop the machine with the needle in the fabric just outside of the appliqué, raise the presser foot lever - Brother International Simplicity SB3129 | Users Manual - English - Page 101
of the fabric. ■ For a seam allowance on the right side Align the right side of the presser foot with the edge of the fabric, and sew using stitch 57 . 1 1 6.5 mm (1/4 inch) ■ For a seam allowance on the left side Align the left side of the presser foot with the 3 edge of the fabric - Brother International Simplicity SB3129 | Users Manual - English - Page 102
use a 90/14 home sewing machine needle. ● The walking foot can only be used with straight or zigzag stitch patterns. Reverse stitches cannot be sewn with the walking foot. Only select straight or zigzag stitch patterns with reinforcement stitches. For details, refer to "Stitch Settings" on page 128 - Brother International Simplicity SB3129 | Users Manual - English - Page 103
bend or break. 1 Feed dog position switch (as seen from the rear of the machine) 2 Back side X The feed dogs are lowered. Turn on the sewing machine, and then select a 5 stitch. • For details, refer to "Selecting stitching" (page 68). Use both hands to stretch the fabric taut, and 6 then move the - Brother International Simplicity SB3129 | Users Manual - English - Page 104
drop feed lever is positioned at the left. Satin stitching A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the sewing machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. In - Brother International Simplicity SB3129 | Users Manual - English - Page 105
Memo ● When the foot controller is plugged in, (start/stop button) cannot be used to start sewing. When you are finished sewing, set the stitch 0 width control setting back to OFF. Memo ● Although the stitching result differs depending on the type of fabric being sewn and the thickness of the thread - Brother International Simplicity SB3129 | Users Manual - English - Page 106
4 . 2 • For details, refer to "Selecting stitching" (page 68). Start sewing. 3 • For details, refer to "Starting to sew" (page 49). 100 Determine the desired length of the bar tack. 1 Set the button guide plate on buttonhole foot "A" to the desired length. (The distance between the markings on - Brother International Simplicity SB3129 | Users Manual - English - Page 107
in the front of the presser foot, otherwise the bar tack will not be sewn with the correct size. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops Cut the threads, raise the presser foot lever, 7 and then remove the fabric. Raise the buttonhole lever to - Brother International Simplicity SB3129 | Users Manual - English - Page 108
Darning Fabric that has been torn can be darned. Darning is sewn as shown below. 1 1 Reinforcement stitching 1 Determine the desired length of the darning. 1 Set the button guide plate on buttonhole foot "A" to the desired length. (The distance between the markings on the presser foot scale - Brother International Simplicity SB3129 | Users Manual - English - Page 109
lever 2 Bracket Gently hold the end of the upper thread in 6 your left hand, and then start sewing. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops Cut the threads, raise the presser foot lever, 7 and then remove the fabric. Raise the buttonhole - Brother International Simplicity SB3129 | Users Manual - English - Page 110
Stitch Name Pattern Application 56 Eyelet stitch Sewing eyelets, for example, on belts Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual " (page 37). Start sewing. 5 X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops Use the - Brother International Simplicity SB3129 | Users Manual - English - Page 111
can be sewn with this sewing machine. Stitch Name Pattern Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot 26 Fagoting stitch 27 Sewing two pieces of fabric together across an open seam 5.0 (3/16) 5.0 (3/16) 0.0-7.0 (0-1/4) 2.5-7.0 (3/25 - Brother International Simplicity SB3129 | Users Manual - English - Page 112
sheet of water-soluble stabilizer. 3 Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot 4.0 0.0-7.0 3.0 2.0-4.0 paper or water soluble stabilizer 2 Basting stitching 3 4 mm (3/16 inch) Attach zigzag foot "J". 3 J After sewing is finished, remove the paper. - Brother International Simplicity SB3129 | Users Manual - English - Page 113
, apply spray starch onto the fabric and press with a hot iron before it is sewn. Trim along the stitches. 4 1 1 cm (3/8 inch) • It is not necessary to sew reverse/ reinforcement stitches or cut the thread. Pull the bobbin threads to create gathers. 4 Smooth the gathers by ironing them. • Be - Brother International Simplicity SB3129 | Users Manual - English - Page 114
Attach zigzag foot "J". 2 J • For details, refer to "Replacing the presser foot" (page 37). Select stitch 20 , and then increase the 3 thread tension. • For details, refer to "Selecting stitching" (page 68). Sew while making sure that the needle drops 4 slightly off the edge of the fabric. 1 108 - Brother International Simplicity SB3129 | Users Manual - English - Page 115
Wrong side of fabric 2 6.5 mm (1/4 inch) seam allowance 3 Straight stitch Select stitch 22 , 23 3 or 24 . • For details, refer to "Selecting stitching" (page 68). Turn the fabric over so that the right side 4 faces up, and then sew over the seam with the center of the presser foot aligned with - Brother International Simplicity SB3129 | Users Manual - English - Page 116
The needle threader cannot be used with the wing needle, otherwise the sewing machine may be damaged. Manually pass the thread through the eye of the needle from the front. Attach monogramming foot "N". 2 Start sewing. 4 CAUTION ● Select a stitch width of 6.0 mm (15/64 inch) or less, otherwise the - Brother International Simplicity SB3129 | Users Manual - English - Page 117
monogramming foot "N". 2 • For details, refer to "Replacing the presser foot" (page 37). Select stitch 33 . 3 • For details, refer to "Selecting stitching" (page 68). With the right side of the fabric facing up, sew 4 along the right edge of the frayed section. N X The pattern is flipped. Press - Brother International Simplicity SB3129 | Users Manual - English - Page 118
an unfrayed section of about 4 mm (3/16 inch). 1 1 4 mm (3/16 inch) Attach monogramming foot "N". 2 • For details, refer to "Replacing the presser foot" (page 37). Select stitch 36 . 3 • For details, refer to "Selecting stitching" (page 68). Sew along the center of the unfrayed section. 4 N 112 - Brother International Simplicity SB3129 | Users Manual - English - Page 119
use the ball point needle. When sewing Select a stitch. 2 • For details, refer to steps 4 through 9 of "Selecting stitching" (page 68). thick fabrics, use a 90/14 home sewing machine needle. In addition, #50 to #60 thread should be Start sewing. 3 used. ■ Trial sewing Depending on the type and - Brother International Simplicity SB3129 | Users Manual - English - Page 120
pattern is sewn repeatedly until the sewing machine is stopped. Press the + key in the operation panel. 2 X The screen for selecting a pattern appears again. Select the next pattern, and then press 3 (OK key). To select a different stitch type, press (stitch selection key). X The combined patterns - Brother International Simplicity SB3129 | Users Manual - English - Page 121
can be combined. ● Some utility stitches cannot be combined. ● If multiple patterns have been combined, the sewing machine stops once all the selected patterns displayed in the LCD have been sewn. To repeatedly sew the combined pattern, refer to "Repeat sewing patterns". ● The combined pattern can - Brother International Simplicity SB3129 | Users Manual - English - Page 122
sewing machine is stopped. ● If the sewing machine is turned off, the repeated/single sewing setting returns to its default setting. Press 3 (OK key). X The screen for checking the pattern appears. Press and to scroll through the pattern 4 and check it. Press 5 (OK key). X The initial stitch - Brother International Simplicity SB3129 | Users Manual - English - Page 123
small. However, the size of other patterns cannot be changed. Select a stitch. 1 Select a character stitch in either the Gothic font or outline style. Press (settings key) changed. Press 6 (OK key). X The initial stitch screen appears again. Sewing the Various Built-In Decorative Patterns 117 - Brother International Simplicity SB3129 | Users Manual - English - Page 124
Press , , and (arrow keys) until 3 is selected. Changing the pattern length The length of one part of a satin stitch can be set to one of five sizes. Select a satin stitch . 1 Press (settings key) in the operation panel. 2 X The settings screen appears. Press , , and (arrow keys) until 3 is - Brother International Simplicity SB3129 | Users Manual - English - Page 125
the pattern The pattern can be mirror imaged along a vertical axis. Select a stitch. 1 Press (settings key) in the operation panel. 2 X The settings screen 6 (OK key). X The initial stitch screen appears again. 1 2 1 Normal 2 Mirror-imaged Sewing the Various Built-In Decorative Patterns 119 - Brother International Simplicity SB3129 | Users Manual - English - Page 126
stored in the pocket. • Do not turn off the sewing machine while a pattern is being stored, otherwise the pattern data may be lost. X After the pattern is stored, the initial stitch screen appears again. ■ Recalling a pattern Press 1 (stitch selection key) in the operation panel. X The screen - Brother International Simplicity SB3129 | Users Manual - English - Page 127
. Press , , and (arrow keys) until 3 is selected, and then select . X The pattern alignment stitch is selected. Start sewing. 4 X The pattern for making the adjustment is sewn. X The sewing machine stops after it has finished sewing the pattern. Sewing the Various Built-In Decorative Patterns 121 - Brother International Simplicity SB3129 | Users Manual - English - Page 128
is correctly aligned. When the pattern is sewn correctly, press a (OK key). X The initial stitch screen appears again. If the pattern is not sewn correctly, following the steps below to adjust the sewing. Press 6 (settings key) in the operation panel. X The settings screen appears. Press - Brother International Simplicity SB3129 | Users Manual - English - Page 129
design at the same height. If the pattern will be repeated, determine the 2 space between the repeating patterns. Determine the sewing order. 4 98 6 5 10 4 7 11 13 12 3 2 0 1 15 16 17 14 For a more attractive stitch, close the pattern by intersecting the line. Designing a Pattern 123 - Brother International Simplicity SB3129 | Users Manual - English - Page 130
" (page 37). Turn on the sewing machine. 2 Specify the coordinates of the second point, 6 and then press (OK key). X A screen appears, allowing you to specify the settings for the stitching between the two points. Specify whether single stitching or triple 7 stitching will be sewn between the - Brother International Simplicity SB3129 | Users Manual - English - Page 131
X The embroidery screen appears. Specify the various stitching settings, such as a reverse/reinforcement stitching, in the same way as with other stitches. • With this screen displayed, pressing (back key) allows you to add or remove points. Memo ● To store the entered pattern data, store it from - Brother International Simplicity SB3129 | Users Manual - English - Page 132
Design exampled Enter each of the points indicated in the table to sew the sample stitch. Point Point 0 0 0 20 38 13 1 12 0 21 35 14 2 18 3 22 32 13 3 22 6 23 30 10 4 23 10 24 32 6 5 21 13 25 35 3 6 - Brother International Simplicity SB3129 | Users Manual - English - Page 133
4 APPENDIX The various maintenance and troubleshooting procedures are described in this chapter. Stitch Settings...128 Maintenance ...135 Troubleshooting ...137 Index ...144 - Brother International Simplicity SB3129 | Users Manual - English - Page 134
Stitch Width [mm (inch.)] Stitch Length [mm (inch.)] Auto Manual Auto Manual Left 1 2 Straight stitch 3 Center Triple stretch 4 stitch 5 Stretch stitch 6 Basting stitch 7 Zigzag stitch 8 Right Center 2-point zigzag 9 stitch 3-point zigzag 10 stitch J Basic stitching, sewing - Brother International Simplicity SB3129 | Users Manual - English - Page 135
Stitching Programmed Thread-Cutting Walking Foot Stitch Name Pattern Application Stitch Width [mm (inch.)] Stitch Length [mm (inch.)] Auto Manual Auto Manual thread-cut- ting No 23 Joining stitch J Patchwork stitching, decorative stitching and sewing overcasting on both pieces of fabric, - Brother International Simplicity SB3129 | Users Manual - English - Page 136
Stitching Programmed Thread-Cutting Walking Foot Stitch Name Pattern Application Stitch Width [mm (inch.)] Stitch Length [mm (inch.)] Auto Manual Auto Manual 29 30 31 32 33 34 35 Decorative stitch -cut- No ting Lace sewing, decoraN tive hemming, heir- loom stitching, etc. Reinforce- 3.5 - Brother International Simplicity SB3129 | Users Manual - English - Page 137
-1/16) No Automatic reinforcement Thread-cutting No Button-sewing 55 stitch M Button sewing 3.5 2.5-4.5 (1/8) (3/32-3/16) - Reinforce- - No Reinforcement ment + thread-cut- No ting 56 Eyelet stitch N Sewing eyelets, for example, on belts 7.0 (1/4) 7.0, 6.0, 5.0 (1/4, 15/64, 3/16 - Brother International Simplicity SB3129 | Users Manual - English - Page 138
.)] Auto Manual Auto Manual Quilting stitch 62 (for stippling) 63 64 65 Side cutter 66 67 J Quilting background stitching (stippling) Reinforce- 7.0 (1/4) 1.0--7.0 (1/16-1/4) 1.6 1.0-4.0 (1/16) (1/16-3/16) No Reinforce- ment + ment thread-cut- No ting S Sewing straight stitches while - Brother International Simplicity SB3129 | Users Manual - English - Page 139
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Character stitches (Gothic font) 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 - Brother International Simplicity SB3129 | Users Manual - English - Page 140
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Character stitches (Script font) 31 32 33 34 35 36 37 38 39 40 41 42 43 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Character stitches (Outline style) 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - Brother International Simplicity SB3129 | Users Manual - English - Page 141
problems occur, such as difficulty turning the handwheel or an unusual noise, immediately stop using the machine, and contact you authorized dealer or the nearest authorized service center. 1 Cleaning the machine should be cleaned periodically. Turn off the sewing machine. 1 2 1 Shuttle race 2 - Brother International Simplicity SB3129 | Users Manual - English - Page 142
with the z mark on the machine. a b a b CAUTION ● Never use a shuttle that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new shuttle (part code: XC3153-321), contact your nearest authorized service center. ● Be sure that - Brother International Simplicity SB3129 | Users Manual - English - Page 143
, check the following possible problems before requesting service. If the problem persists, contact your retailer or the nearest authorized service center. Symptom Probable Cause Remedy Reference The machine is not turned on. Turn on the machine. page 11 The sewing machine does not operate - Brother International Simplicity SB3129 | Users Manual - English - Page 144
thread being used. Select a needle that is appropriate for the type of stitch being used. The upper thread tension is too tight. Loosen the upper Contact your retailer or the nearest authorized service center. A bobbin designed specifically for this machine is not used. Incorrect bobbins will not - Brother International Simplicity SB3129 | Users Manual - English - Page 145
fabric does not feed. ▼ The stitch is too fine. The presser foot that is used is not appropriate for the type of stitch that you wish to sew. Lengthen the stitch length. Attach the presser foot that is appropriate for the type of stitch that you wish to sew. page 56 page 128 Troubleshooting 139 - Brother International Simplicity SB3129 | Users Manual - English - Page 146
beginning of stitching. The sewing lamp does not come on. The sewing lamp is service center. Adjust the brightness of the LCD. After removing the thread wound below the bobbin winder seat, wind the bobbin correctly. Correctly pass the thread through the bobbin-winding thread guide. Move the sewing - Brother International Simplicity SB3129 | Users Manual - English - Page 147
patterns are combined. The selected setting cannot be changed with the selected pattern. If error message "F01" through "F09" appears in the LCD while the sewing machine is being used, the machine may be malfunctioning. Contact your nearest authorized service center. Troubleshooting 141 - Brother International Simplicity SB3129 | Users Manual - English - Page 148
LCD is either too light or too dark. If this is the case, perform the following operation. Turn off the sewing machine. 1 While pressing (back key) in the 2 operation panel, turn on the sewing machine. Press (-) or (+). 3 Adjust the brightness of the LCD so that the screens can be seen. Turn off the - Brother International Simplicity SB3129 | Users Manual - English - Page 149
operation beep When the sewing machine is purchased, it is set to beep each time an operation panel key is pressed. This setting can be changed so that the machine does not beep. Turn on the sewing machine. 1 Removing the upper cover If the upper cover of the sewing machine was removed, re-attach - Brother International Simplicity SB3129 | Users Manual - English - Page 150
+ key Cover E Numerics 2-point zigzag stitch 71 3-point zigzag stitch 71 A accessories Cover A , adjustable zipper/piping foot 1 89 air vent Cover C appliques 93 arrow keys Cover E automatic reinforcement stitching 57 automatic reverse stitching 57 automatic thread-cutting 59 B back key - Brother International Simplicity SB3129 | Users Manual - English - Page 151
manual Cover A , operation panel Cover B Cover E optional accessories 1 original patterns 123 sleeves 100 smocking 107 spool cap Cover A, 19, 25 , spool net Cover A 31 spool pin Cover B, 19, 25 , start/stop button Cover D 49 overcasting stitches 70 starting sewing 49 , stitch guide - Brother International Simplicity SB3129 | Users Manual - English - Page 152
APPENDIX Z , zipper stitching 85 89 146 - Brother International Simplicity SB3129 | Users Manual - English - Page 153
- Brother International Simplicity SB3129 | Users Manual - English - Page 154
- Brother International Simplicity SB3129 | Users Manual - English - Page 155
- Brother International Simplicity SB3129 | Users Manual - English - Page 156
Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). English 885-S61 Printed in China XF4637-001
Sewing Machine
Product Code: 885-S61
Operation Manual
GETTING READY
SEWING BASICS
UTILITY STITCHES
APPENDIX
Read when additional
information is required.
Read before use.