Brother International Simplicity SB3129 Users Manual - English - Page 47
Raise the presser foot lever., With a screwdriver, loosen the presser foot, holder screw, and then
View all Brother International Simplicity SB3129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Raise the presser foot lever. 3 1 1 1 Presser foot lever X The presser foot is raised. With a screwdriver, loosen the presser foot 4 holder screw, and then remove the walking foot. Attach the presser foot holder. 5 • For details, refer to "Removing the presser foot holder" (page 39). Memo ● Only the straight stitch (with reinforcement stitching) and the zigzag stitch can be used with the walking foot. For details on the stitches, refer to "Stitch Settings" (page 128). Replacing the Presser Foot 41
Replacing the Presser Foot
41
1
3
Raise the presser foot lever.
1
Presser foot lever
X
The presser foot is raised.
4
With a screwdriver, loosen the presser foot
holder screw, and then remove the walking
foot.
5
Attach the presser foot holder.
• For details, refer to “Removing the presser
foot holder” (page 39).
Memo
●
Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to “Stitch Settings” (page 128).
1