Brother International Simplicity SB3129 Users Manual - English - Page 109
Cut the threads, raise the presser foot lever
View all Brother International Simplicity SB3129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Pull down the buttonhole lever as far as 5 possible. 1 1 Buttonhole lever The buttonhole lever is positioned behind the bracket on the buttonhole foot. 1 3 2 1 Buttonhole lever 2 Bracket Gently hold the end of the upper thread in 6 your left hand, and then start sewing. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops Cut the threads, raise the presser foot lever, 7 and then remove the fabric. Raise the buttonhole lever to its original 8 position. Memo ● If the fabric does not feed, for example, because it is too thick, increase the stitch length. For details, refer to "Adjusting the stitch length" (page 56). Reinforcement Stitching 103
Reinforcement Stitching
103
3
5
Pull down the buttonhole lever as far as
possible.
1
Buttonhole lever
The buttonhole lever is positioned behind the
bracket on the buttonhole foot.
1
Buttonhole lever
2
Bracket
6
Gently hold the end of the upper thread in
your left hand, and then start sewing.
X
Once sewing is completed, the machine
automatically sews reinforcement stitches,
then stops
7
Cut the threads, raise the presser foot lever,
and then remove the fabric.
8
Raise the buttonhole lever to its original
position.
Memo
●
If the fabric does not feed, for example,
because it is too thick, increase the stitch
length. For details, refer to “Adjusting the
stitch length” (page 56).
1
1
2